Hot Sale Metalworking Machine for Band Saw Machine (ST-14CNC-SC)

China Hot Sale Metalworking Machine for Band Saw Machine (ST-14CNC-SC), Find details about China Pipe Cutting, Tube Cutting from Hot Sale Metalworking Machine for Band Saw Machine (ST-14CNC-SC)

Basic Info.

Model NO.

ST-14CNC-SC

HS Code

8461500090

Model NO.

ST-14CNC-SC

HS Code

8461500090

Product Desciption

1. The structure of the equipment
1) straightening and rounding institution: straightening mechanism with coil bending can manually adjust the situation. When specification change, wheel alignment can be replaced separately and straightening round substrates.
2) Body: welded structural steel made from high quality, overall eliminate welding stress, the mounting substrate once forming process.
3) Fixed-length feed mechanism: servo motor drive ball screw for precise feeding, feed length can be set directly on the touch screen.
4) Chipless cutting unit: the outer rotating cutter and roller structure, feed and return with independent mechanical propulsion.
5) Splice rack: splice points on both sides at the same time, at the contact with the pipe, pneumatic dosing device, to no mixing and other functions;

6) Dies:

Straightening: chrome steel, hardened surface hardness of not less than HRC50±3.

End forming: Cr12, hardened surface hardness of not less than HRC55±3
7) If the device picture as not consistent with the physical, are to prevail in kind.
2. Security requirements
1. Involving the personal safety of the site shall have protective devices or warning.
2. The equipment has a good grounding.

Items		Specification	Remark
Processing material	Material	Copper tube
Processing material	OD &thickness	φ6~φ14
Processing capacity	Pipe cutting no.	1 pipe
	Feeding travel/time	1000mm
	Cutting length	70~3000mm	If the cutting length<120mm,no pre-pull process,and reducing rate will be another explanation
	Production efficiency	Cutting: more than 9 times a minute(L=500 mm)
Processing accuracy	Straightness tolerance: Length error tolerance: Reducing rate	≤2‰; 0.5mm/1000mm; Reducing ratre≤20% single side≤0.15mm	d_o=Actual thickness d₁=thickness Reducing rate= (d_o -d₁)/d₀ ×100% d_o--Original pipe ID d₁-- After cutting pipe ID
Processing accuracy	Surface condition	Copper tube surface have no obvious scar, scratch, pressure and knurled scoring, no burr tube
	Electric power	AC380V 50HZ, 3 phase
	Total power	2.2 KW
	Air pressure	0.5-0.7Mpa
	Hydraulic pressure	10Mpa
	Cooling way	Air cooling
	Dimension	330011001900mm