Products

Disposable China Factory PP N95 FFP2 FFP3 Melt Blown Nonwoven Fabric Material Making Machine for Medical Mask

Disposable China Factory PP N95 FFP2 FFP3 Melt Blown Nonwoven Fabric Material Making Machine for Medical Mask, Find details about China Melt Blown Extrusion Machine, Melt Blown Filter Machine from Disposable China Factory PP N95 FFP2 FFP3 Melt Blown Nonwoven Fabric Material Making Machine for Medical Mask

Model NO.
MY-880
Warranty
1 Year
Effective Width
820mm
Weight
About 3.5tons
Power
380VAC
Power Rate
260kw
Production, 8kg/Daycapacity
500~800kg/Day
Conveyor Speed
4-20m/Min
Operator Need
2/Set
Weight Range
15-80G/M²
Installed Power
260kw
Trademark
TongWei
Transport Package
Wooden Box
Specification
L12000mm; W2400mm; H2800mm
Origin
China
HS Code
8477209000
Model NO.
MY-880
Warranty
1 Year
Effective Width
820mm
Weight
About 3.5tons
Power
380VAC
Power Rate
260kw
Production, 8kg/Daycapacity
500~800kg/Day
Conveyor Speed
4-20m/Min
Operator Need
2/Set
Weight Range
15-80G/M²
Installed Power
260kw
Trademark
TongWei
Transport Package
Wooden Box
Specification
L12000mm; W2400mm; H2800mm
Origin
China
HS Code
8477209000
Oil Particles and BFE99 Grade Surgical Mask PP Melt Blown Material Production Line
Disposable China Factory PP N95 FFP2 FFP3 Melt Blown Nonwoven Fabric Material Making Machine for Medical Mask
Application:
Health Care: Medical Face Mask; Baby diaper; Women sanitary napkin and so on
Disposable China Factory PP N95 FFP2 FFP3 Melt Blown Nonwoven Fabric Material Making Machine for Medical MaskDisposable China Factory PP N95 FFP2 FFP3 Melt Blown Nonwoven Fabric Material Making Machine for Medical Mask

 

Disposable China Factory PP N95 FFP2 FFP3 Melt Blown Nonwoven Fabric Material Making Machine for Medical MaskDisposable China Factory PP N95 FFP2 FFP3 Melt Blown Nonwoven Fabric Material Making Machine for Medical Mask
Production process of meltblown fabric
Disposable China Factory PP N95 FFP2 FFP3 Melt Blown Nonwoven Fabric Material Making Machine for Medical MaskDisposable China Factory PP N95 FFP2 FFP3 Melt Blown Nonwoven Fabric Material Making Machine for Medical Mask
  1. Trade term: FOB Guangzhou
  2. Payment term: 50% T/T of the total amount shall be paid as the deposit when the contract is signed, and 50% balance paid by T/T before delivery.
  3. Delivery time: 25-28 days upon receipt of deposit.
  4. Place of delivery: Party A's factory.
  5. Installation and debugging: Due to current special period of the outbreak , Party A cannot provide to-door installation, Party A will complete whole set machine installation and debugging in the factory and notify Party B to check the equipment in Party A's factory before shipment. When Party B confirms the acceptance of the equipment, then the machine will be shipped out from Party A's factory. Party A provides contactless installation guidance, such as operation instructions, teaching video and remote video guidance.
  6. Warranty: 12 months for mechanical parts and 6 months for electrical components from the date of delivery. During the warranty period, if there is a product quality problem, Party A shall be responsible for the maintenance and supply of maintenance accessories (vulnerable parts such as ultrasonic and generator, etc., force majeure or equipment damage caused by Party B, it is not within the warranty scope). If the equipment is damaged due to Party B's reason, the maintenance cost shall be borne by Party B.
  7. If Party B uses repair services or replacement parts not provided by Party A or not approved by Party A, the warranty period shall be suspended in advance.
  8. If Party A is unable to perform the contract due to force majeure, Party B shall exempt Party A from the responsibility of failure or delay to perform the contract.
  9. Way to solve the contract dispute: in case of any dispute between the two parties, friendly negotiation shall be conducted; if the negotiation fails, it shall be handled by the people's court in the place where Party A is domiciled.
    Disposable China Factory PP N95 FFP2 FFP3 Melt Blown Nonwoven Fabric Material Making Machine for Medical MaskDisposable China Factory PP N95 FFP2 FFP3 Melt Blown Nonwoven Fabric Material Making Machine for Medical MaskDisposable China Factory PP N95 FFP2 FFP3 Melt Blown Nonwoven Fabric Material Making Machine for Medical Mask
    1 What's the advantage of your production line?
    Our production can manufacture hydro charging melt blown fabrics which have higher BFE, PFE and lower resistance. Our production
    line need smaller rooms of 7000mm * 2671mm * 2600mm.

    2 How about you after sale service?
    we will send you a video of the full details machine installation and assist you till the end.

    3 How can you ensure the quality of the machine?
    Before delivery, we will send you the pictures and videos for you to check the quality, and also you can arrange for quality checking by
    yourself or by your contacts in China.

     

You Might Also Like