1,
Description:
ELE Continuous Horizontal Single Shaft blenders consists of a cylindrical blending tank vessel with a feeding inlet at one end, a discharge outlet at the other opposite end, a hollow shaft, two end plates which carry flanged end bearing assemblies complete with integrated adjustable shaft sealing unit, and a drive unit complete with power transmission.

2,
Working principle: Ploughshare, paddle or ribbon rotate as blending tools in a special arrangement on the blender single shaft in the blending tank vessel. The result is a turbulence in the mix that constantly involves all the product particles in the blending process. The formation of dead corner or slow-movement zones in the blending tank vessel is prevented ensuring precise & homogeneous blending. In some cases, to obtain the desired blending effect, separately driven high speed chopper(s) can be assembled.
ELE Continuous blenders operate on the principle of a mechanically generated fluid bed. Ploughshare paddle or ribbon blending tools rotate close to the horizontal, cylindrical tank vessel lifting the powder or granule components to be mixed from the product bed into the open blending area. The quality of the mixture is achieved before the product reaches the blender outlet.

3,
Application:
ELE Continuous blenders are suitable for dry bulk solids (powders, granules, short figure), dry bulk solids + small quantity of liquids, sludges and low-viscosity pastes.
ELE Continuous blenders are widely used in food, pharmaceutic, pesticide, chemical, pigment, dye, ceramic, building materials etc. Industry.

4,
Features:
--Available working capacity: 40 - 6000 after
--Available material: Stainless steel, carbon steel
--Drive: Single Speed, cycloid/gear reducer, Siemens motor
--Feeding inlet on top cover
--Central bottom flap discharge valve
--Designed for atmospheric operation
--Stuffing boxes with easily disassembled housings. Pure Teflon gland packing provided.
--Stainless steel surfaces are polished to desired standards. All exterior non-stainless steel surfaces are painted.
--Suitable for 380 Volts, 50 Hz, three Phase
--with Electrical Control Panel.
--blender is mounted on supports with adequate discharge clearance.

5,
Options and accessories:
--high speed (1500RPM) chopper
--heating, cooling jacket
--Wear resistant liner plates for abrasive products.
--Split design stuffing boxes, Air-purging stuffing boxes, Mechanical Seals.
--Good Manufacturing Practice (GMP) models.
--Explosion-proof motors.
--Variable Speed Drives.
--Cleaning, inspection windows on the container.
--Spraying system for liquid injection.
--CE certificated
--Heavy-duty configuration
--special materials
--pressure design