China Vacuum Forming Machinery for Cooling Tower Filler (Mengxing), Find details about China Cooling Tower Filler Forming Machines, Vacuum Forming Machine for Cooling Tower Fillers from Vacuum Forming Machinery for Cooling Tower Filler (Mengxing)
LXC70-135/190-BWF Cooling Tower Fill Forming Machine
I,Usage
This vacuum forming machine is widely used for making vacuum formed products like cooling tower fills from PVC, PS, PP, EPS, PET, Bio-degradable material, APET, PETG and so on.
II,Operation Principle
Operation processes: The heated and soften plastic sheet are being vacuum formed in the mold in order to get the various finished products. The operation processes are: sheet-feeding-heated-forming-side trimming- crosscut.
III,Structure feature
01. The machine is combined with pneumatic , mechanical and electricity driving, adopt PLC control . It can achieve sheet feeding , heating , forming , side trimming , crosscut into continuous job .
All working action can adjust uder non-stop production . It's convenient and high capacity , easy for operation .
02. The working method can crosscut by different pattern of fill .
03. Servo motor feeding , feeding length stepless adjustabe , precision and reliable.
04. Cutting unit with servo motor driving , electrical & pneumatic adjustable by different length crosscut ( the length must be longer than each forming mold length ) .
05. Forming area is big and easy for mold installation & replace.
06. Cylinder roll sheet loading , feeding chain manual adjust.
07. Upper , lower mold stroke limited , up mold descend motor adjust.
08. Forming area double adjustable , can save the sheet material .
09. Back acting plate adopt double cylinder method , motor setting position .
10.Vacuum in two steps.
11. Fan blowing , air spray cooling device .
12. Heater adopt individual heating temperature control . ( Point to Point )
13. Advance sheet feeding , heating parameter can automatic adjust.
IV,Technical Parameters
Sheet size | width 700-1350mm, thickness 0.12-1.2mm |
Max. sheet sending length | 1900mm |
Max. forming area | 1320×1880mm |
Capacity | 4-10cycles/min |
Power usage | 415V(3 phases 4 lines), max. 112.93Kw total |
Air consumption | ≥2 m³/min. (prepare by client). |
Operation air pressure | 0.7Mpa(air source 0.8-1mpa). |
Dimension(L×W×H) | 8070×3920×2575mm |
Weight | about 4500kgs |
PLC | Taiwan Delta |
Touch Screen Monitor ( 7″inch /Color ) | Taiwan Delta |
Feeding Servo Motor(3.0kw) | Taiwan Delta |
Servo Motor of cutting unit (0.75kw) | Taiwan Delta |
Heater (164 PCS) | CHINA |
Solid Voltage Regulator | CHINA |
Contactor | Germany Siemens |
Thermo Relay | Germany Siemens |
Relay | JAPAN Omron |
Vacuum Pump (2 sets) | Busch R5 0100 |
Pneumatic | SMC |
Cylinder | CHINA |
Air Sprayer | Meiji |
Fan Blower (7×0.55 kw ) | Manda |