China IEC 61215 Standard PV Module UV Preconditioning Testing Machine, Find details about China Solar Panels, IEC 61646 Standard from IEC 61215 Standard PV Module UV Preconditioning Testing Machine
High Quality Materials IEC 61215 Standard PV module Testing Machine UV Preconditioning Testing Machine
HTPV-15
-UV Preconditioning Testing Machine
-Standard:According to IEC61215,IEC61646 standard requirement
-Purpose:To precondition the module with ultra-violet(UV) radiation before the thermal cycle/humidity freeze tests to identify those materials and adhesive bonds that are susceptible to UV degradation
Technical specification:
1.Use material:can completely obstruct ultraviolet rays,tightness,good thermal insulation's high quality materials
2.Machine UV total irradiation area:more than 2000mm*2000mm,meanwhile satisfy 2pcs module(2*1m)
3.Light source life:system use metal halid lamp,lamp life is 1000 hours,delivery offer one set of spare part,use the life ar above 2000 hours
4.Single lamp UVA and UVA relative energy rate:UVB approx occupy total energy 3%~10%
5.Irradiation strength:wavelength 280nm~385nm's irradiation strength can reach about 100W/m,promise the test cycle reduce as far as possible
6.Irradiance uniformity:be better than ± 15%
7.Real-time monitor and show UVA and UVB strength
8.UVA(320nm~385nm),UVB(280~320nm)Each one of the fiber optic probes
9.Module surface temperature:60ºC±5ºC
10.Temperature resolution:0.1ºC
11.Ozone:Almost no ozone is produced
12.Light ways:Upper light,module test plane vertical light source
13.Touch screen operate and real-time monitor,when reached the set value will automatic cut off the light source
14.Real-time figure show module surface temperature,measurement accurate ± 0.1ºC