Fiberglass infusion mat 200/180/200 is a special reinforcement specifically designed for use in closed mould systems such as RTM and Vacuum Infusion. The surface layers consist of chopped strands E-glass fibre which are stitched together with a porous elastic layer in between. The middle layer is core material made from polypropylene which provides increased resin flow properties along with
good surface quality.It is suitable for producing cooling tower, boat, nacelle, tuckbody and so on.Product Specifications:Fibre Fibreglass
Product Type Infusion Mat
Construction 200/180/200
Density 584 g/m2
Width 720 mm
Thickness 2.40 mm
Pack Qty 16.8 kgs
Finish Silane
UOM ROLL
Properties:Core Resilience and Compressibility.
Rovicore adapts to the different thicknesses of composite parts.
Good Surface Aspect:
The homogeneous finish of the cut glass fiber helps improve the surface aspect of finished parts.
High Permeability of the Synthetic Core:
The high permeability of its synthetic core allows resin to quickly flow through the part. ROVICORE is thus perfectly adapted to low-pressure injection processes, while ensuring a rapid flow.
Technical Data: Id | Layer | Unit | 1 | 2 | 3 | Stitching |
2.1 | Fibre orientation | Degrees | CS | Non-woven | CS | |
2.2 | Nominal area weight | g/m² | 200(tolerance 8%) | 180 (tolerance8%) | 200(tolerance 8%) | 4 |
2.3 | Roving/yarn weight | tex | 600tex | | 600tex | 150 dtex (148) |
2.5 | Av. filament diameter | mm | 12 | - | 12 | Polyester(textured) |
2.6 | Roving type | - | Assembled roving | - | Assembled roving | |
2.7 | Resin compatibility | | UP, VE | | UP, VE | |
2.8 | Stitching type | | | | | Tricot, chain |
2.9 | Space between needles | | | | | 3.5F/inch |
2.10 | Stitching length | | | | | 4.0mm |
Picture of Product:Give us a chance, and we' ll return you with satisfaction.