HPM series high-pressure foaming machine is zhangjiagang strength and industrious Machinery Co. Ltd following the international latest high technology and according to word wide the PU industry that independent innovation high technology products .The main parts are import from foreign country, equipment technical and safely performance are reached the word wide advanced capacity. The equipment is widely used automobile industry, insulation industry, air conditioning industry, electric appliance industry and furniture industry and so on. Also, expanding the application field .
   HPM high -pressure foaming principle
   Both Polyol and Isocyanate are stored separately in two tank, and used two rotary axial metering pumps to take material to mixing head, two components injection to a small mixing room at high pressure and flow rate when mixing head started in the hydraulic control, and collide with each other instantly, pass moving transformation that reached to mixing and flow to mold control, after pouring output time that mixing head piston rod forward, all material are pushed to mixing chamber and mixing chamber is cleaned by piston rod, don't left any material. Component passed beside of piston rod return to material tank. If it
don't inject in a long time , low-pressure recalculation switchover unit but two-control component into low recalculation.
  Because of equipment' exact calculation, has a small loss and needn't clean and it will be good at environment-protect and reduce the material costs. In the all areas that is to be more and more widely used.


This system consists of 1 set of HPM50/20 high pressure foaming
Machine, 2sets of MHM255/195 Molding Machine, 1 set of ABB
IRB6640-180/2.55 pouring robot, 1 set of hydraulic unit, 1 set of vacuum
Pump unit and electrical control system etc.
It is used for automobile carpet PU foaming on the synthetic fa bric parts and
The other similar parts foaming production.
All the ordinal operation f or foaming production (to open the mold, close the
Mold, lock the mold, drive the mold-plate up/down, clamping the parts etc)
Is hydraulic/pneumatic driven and by PLC control.
Molding Machine Main Technical Parameter:
Mold installation board area: 2, 550× 19, 50mm
Mold installation space height: 670mm
Movable mold-plate stroke: 50mm
Mold-plat above open angle: 180°
Mold-plat below open angle: 90°
Hydraulic working pressure: 10~ 12MPa
Control voltage: AC 220V/DC24V