1. Equipped with high-speed DSP control system, can work offline, with multi-color cutting function
2. Industrial laser head, laser beam is stable and fast.
3. Air assist, attach an air compressor to our included air assist to remove heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface.
4.  Red dot positioning optional. Since the laser beam is invisible the red dot pointer allows you to have a visual reference for locating where the laser will fire.
5. Magnetic OVERRIDE SAFETY SWITCH, more reliable.
6. 0-200mm motorized up and down platform, can meet the needs of different thickness materials for carving.
7. With two way pass through, allow feeding bigger size material.
8. Ethernet, USB2.0 and U-disk transmission, compatible with Windows XP/Vista/7/8/10, work independently from PC, which is useful for the quantities of engraving and cutting production.
9. Full support for CorelDraw, AutoCAD, etc. CE and FDA certificate, more reliable.
 

INDUSTRIAL LASER HEAD
More Stable and specific
Each machine has a focal length acrylic sheet, it help you adjust the length from the nozzle to the bed.

Aluminium blade table:
to process hard materials like acrylic, wood and so on.
But for soft material You can need to choose honeycomb table, we sell honeycomb table also.

Alarm Lamp

Show the work state and tell when the job is done, more safe for you.
Finishing your work is important, but safety is most important thing, especially for the beginners. 
And this model is popular in school, we are sure this is useful.

Step Motors

1000mm/s speed for engraving photo, super smooth vector cutting quality.

High quality power cable

The high-quality electrical connector has low and stable contact resistance.

1. Funnel: collect waste and garbage
2. Soft Close Lid Support Gas Spring Cabinet Door Safety Lift Support

CE FDA
 

The machine is well packed in wooden box and we buy insurance for the shipping.

Q: Do I need two laser machines to engrave and cut separately?
A: No, the laser machines we provide are capable of both engraving and cutting. One machine alone can fulfill the two purposes.
Q: Do the laser machines need to be connected to a laptop or desktop computer to work?
A: Yes, either is ok. It supports Windows 10, Windows 2000, Windows XP, Win 7, and other operating systems.
Q: What kind of graphic format does it support?
A: JPG, PNG, BMP, PLT, DST, DXF, CDR, AI, DSB, GIF, MNG, TIF, TGA, PCX, JP2, JPC, PGX, RAS, PNM, SKA, RAW , etc.
Q: How to distinguish laser tubes with different powers and applications?
A: 1. Laser tube length (relatively speaking, the longer, the bigger)
2. Laser tube diameter (relatively speaking, the thicker, the bigger)
3. The bigger a laser tube power is, the deeper the machine can cut, but its light spot is bigger. So, it is better to use a machine with a low-power laser tube to engrave, such as 40W, 50W or 60W.
Q: Is it better to increase blow to improve laser processing performance?
A: For some thick materials, it works. But, when carving some other materials, you need to blow less.
Q: How long will it take to learn to operate a laser machine?
A: If you are able to use some basic graphic design software, it will only take a few hours to master the operation. You just need to do some simple tests on different processing materials to know how to set the correct speed and laser power.
Q: Is a laser machine in operation harmful to our bodies?
A: It is not harmful as long as the laser is not exposed directly to skin and eyes.