New arrival 13S 15A  PCB/BMS with bluetooth for lithium battery

Important instructions: 
1.  Range of application
<350W load
2. Electronic Core requirement
Single Cell Internal Resistance≤35MR.
3. Artcraft Requirement
The whole group cells DC circuit current≥200A(3.6V testing voltage).
4. Temperature requirement
Store Temperature:-25°C~85°C 
Working Temperature:-20°C~75°C
5. Other requirement
1) Not allowed to use in cascade
2)For the first time PACK,may cause not discharging,need to charge it to active.
3) Welding order as B-,B1,B2...B+
4)While welding,must use grounding soldering iron.
5)The soldering iron must control as 360~400degree celsius.
6Forbid to use P- as charging port,because while P- used as charging port,the cell group without protection.
7)Must doing well on anti-static,waterproof,dust proof;Well protect the protecting board to avoid striking or extrucsion.

Application Range:
Lithium ion, lithium polymer battery ,etc. Can be rechargeable lithium battery pack

Features:
1)Charger Recognize:When misconnect high voltage charger, charging is prohibited
   2)Using time preset:can do preset on time limitation by PC,when reach time limitation turn off output.
3) Recycle time:500 recycle times,then turn off output.
4) Voltage,current,temperature,power,cycles and other data can be read by bluetooth.
5)Bluetooth can read speed power, speed, range, etc. And with overspeed alarm, low battery alarm, range, and other functions

Specification

Connection: 
We supply bluetooth bms for silver fish battery, bottle battery, rear rack battery, frog battery, bottle battery and shrink battery packs. Through the bluetooth, you can read the data of the rest capacity, voltage, capacity, current, temperature and so on of the battery pack, which is very convenient to monitoring the battery status.