Duplex
Service Drop

2/0AWG.ACSR neutral conductor

Aluminum Conductors. Polyethylene or Crosslinked Polyethylene Insulation.


APPLICATIONS

Primarily used for 120 volt overhead service applications such as street lighting, outdoor lighting, and temporary service for
construction. To be used at voltages of 600 volts phase-to-phase or less and at conductor temperatures not to exceed 75°C
for polyethylene insulated conductors or 90°C for crosslinked polyethylene (XLP) insulated conductors.

SPECIFICATIONS

Southwire's duplex service drop cable meets or exceeds the following ASTM specifications:
? B-230 Aluminum Wire, 1350-H19 for Electrical Purposes.
? B-231 Aluminum Conductors, Concentric-Lay-Stranded.
? B-232 Aluminum Conductors, Concentric-Lay-Stranded, Coated Steel Reinforced (ACSR).
? B-399 Concentric-Lay-Stranded 6201-T81 Aluminum Alloy Conductors.
? B-901 Compressed Round Stranded Aluminum Conductors Using Single Input Wire.
Southwire's duplex service drop cable meets or exceeds all applicable requirements of ANSI/ICEA S-76-474.

CONSTRUCTION
Conductors are concentrically stranded, compressed 1350-H19 aluminum. Insulated with either polyethylene or crosslinked
polyethylene (XLP). Neutral messengers are concentrically stranded 6201, AAC, or ACSR.

ABC Cable; Service Drop Cable 

The basic construction is as follows: 
power cores consisting of standard aluminium conductors, insulated with 

XLPE insulation 
+ One sheath lighting aluminium conductor with XLPE insulation(optional) 
+ One messenger Al-alloy conductor (bare or covered) 

The messenger conductor can be of galvanised steel wire also. 
The purpose of messenger wire is 
A) It acts as load bearing wire. 
B) It acts as earth or neutral conductor. 

To be used at cotages of 600V phase-to-phase or less and at conductor temperatures not to exceed 75oC for polyethylene insulated conductors or 90oC for crossliked polyethylene(XLPE) insulated conductors. 

Standards: 
1. B-230 Aluminum Wire, 1350-H19 for Electrical Purposes. 
2. B-231 Aluminum Conductors, Concentric-Lay-Stranded. 
3. B-232 Aluminum Conductors, Concentric-Lay-Stranded, Coated Steel Reinforced (ACSR). 
4. B-399 Concentric-Lay_Stranded 6201-T81 Aluminum Alloy Conductors. 
5. B498 Zinc-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR). 
6. Duplex Service Drop cable meets or exceeds all applicable requirements of ANSI/ICEA S-76-474