SMT 6Heating Zone Reflow Soldering oven
TN360C
Introductions:
SMT 6Heating Zone Leadfree Reflow oven TN360C uses SSR solid relay (450V) that has large power and pressure prevention to non-contact output, safe and reliable. It can monitor the change of temperature and heat number in furnace chamber with the functions fuzzy control and data collection. Then control the heating component with the least pulse and response quickly. TO keeps the Temperature control accuracy, but the equipment can not be damage for the high current and high voltage. And each room fits a safety pipe which is high temperature and high pressure resistant function so that the whole system can run safely and calmly.
Features:
1> Intuitional welding control: TN360C adopts advanced furnace temperature collection system. It can test temperature curve and temperature in furnace hearth. The temperature curve can be recorded or printed at the same time.
2> Smooth and safe transmission system: Drive system adopts a high quality conversion motor and conversion system .It also has a closed-loop governor and Turbine speed reducing box of 1:100 to keep running smoothly .Speed:01600mm/min.
3> Stable and safe electric control system: Delay switch protection. After power off, temperature drops evenly so that can prevent damage to transmission component and heater.
4> Upper and lower heating zones are separately controlled. The circulation speed can also adjust separately. It is suitable for welding different PCB plates and components.
The selling point :
1. Chanel reflow oven with the thickness of 150mm
2. Use 24 chanel modular design reflow oven hardware temperature control system .
3. The only industry can achieve custom fuinction reflow oven software system .
4. The only industry have remote control reflow oven software system
5. Equipped with top brand HP OR Lenovo computer,such as optional industy computer according to customer requirment .
Specification:
Model |
TN360C |
Heating part parameter |
Heating zone |
6 heating zones(6 upper,6 cover)+1 cooling zone |
Heating method |
Full forced Hot air heating |
Heating area length |
1800mm |
Cooling zone |
1 zone, (1up/1 below) |
Cooling method |
transverse flow vortex centrifuge blower |
Built-in automatic relay heating system |
To prevent over-pressure damage controller or motor when start up and to prevent component damage when welding. |
Transmission parameter |
PCB Board width |
≤ 300mm |
PCB conveyor Height |
900±20mm |
conveyor direction |
L→R |
Conveyor Material |
Stainless steel |
Chain-driven Mesh belt conveyor |
Net belt and chain-driven transmission |
Mesh belt width |
300mm |
Conveyor speed |
0-1600mm/min adjustable |
Control part parameter |
Power supply |
380V (3 ph, 4 wires) 50/60Hz |
Max Power |
34kw |
Normal working power |
19KW |
Warm-up time |
≤ 30min |
Control system |
PLC+ Torch module temp control system+ IPC |
Range of temperature control |
Room Temperature-360 ºC |
Temperature control |
Advanced Intelligent micro computer PID temperature control automatically in each zone + SSR non-contact output |
Precision of temperature control |
± 2ºC |
Temperature distributing error |
± 2ºC |
Machine Body Parameter |
Net Weight |
680 kg |
Dimension( L×W×H )(mm) |
(2900×900×1300mm) |
Kindly contact with me