Adhesive Fiber glass Mesh Tape is woven from C-fiberglass yarn, then coated with adhesive acrylic latex.Save 

considerable time and eliminate one step of mudding when combining the self adhesive mesh tape with a setting 

compound. This product has good performances like good softness, high stickiness, and easy application.Used to 

cover seams in the process of drywall construction, also be used to wall and ceiling problems, seal corners where

two sections of drywall meet. 

This tape is high tensile strength, good dimensional stability, stability to temperature, and corrosion resistance. Repair the crack and joints or holes of drywall, plasterboard, stucco; and repair other damages in other wall surface.
 

Specifications

1) Mesh size: 2.85 x 2.85mm (9 x 9 mesh), 3.2 x 3.2mm (8 x 8 mesh)
2) Weave: leno
3) Width: 50mm, 100mm, 150mm, 200mm, 1000mm, 1200mm, 1500mm, etc.
4) Length of roll: 20 m to 900m, Any demand length is available, or according to client requirements
5) Colors available: white , yellow, grey, silver , blue, black, etc.
6) Main size: 50mm x 90m, 50mm x 45m, 50mm x 20m, 50mm x 153m
7) packing: Inner packing: shrink packing or plastic bag,
Outer packing: 24 rolls or 54 rolls or 72 rolls/carton or pallet packing

Direction of Applications

1.Wall must be clean and dry
2.Center and apply tape over the length of the joint, pressing firmly
3.Apply a generous first coat of compound over the and through the mesh, making sure to completely fill the joint crevice. When the joint has been completely filled, wipe off any excess compound with the drywall knife leaving enough to cover the tape.
4. Let dry completely, then sand slightly.
5. Apply sufficient thin finishing coats to produce a smooth wall surface.
6. Cut or butted boards do not have a tapered edge. Therefore, special
care must be taken to assure proper compound penetration of all joints. This may result in slight build-up of compound that will require an increased amount of edge feathering.

Caution
1.Failure to completely fill the joint may result in cracking.
2. For best results, use a setting-type compound.
 
Loading

Standard export loading

Markets

Nanjing EFG CO., LTD. has delivered this product to USA, EU, Middle East, North Africa, South Africa, Asian customers with ensured quality and rich experience for export deliveiry.  
Nanjing EFG CO., LTD welcomes cooperation from all of the world.

Delivery

Fiberglass AGM mat will be loaded into container in factory, then be delivered to the sea port, finally be shipped to Customer's port by MSK, MSC, CMA, COSCO, YANGMING, APL,  etc.

Payment

LC, T/T, CAD, PAYPAL, WESTERN UNION, ETC.

After sales service

Nanjing EFG CO., LTD tracks cargo of every shipment till customer uses the fibreglass mat, and offer any help for customer's demand in any time.