China Vessel Stainless Steel High Pressure Reactor Autoclave, Find details about China Stainless Steel Chemical Reactor, Lab Stainless-Steel Reactor from Vessel Stainless Steel High Pressure Reactor Autoclave
This equipment is customized for the special needs of customers. To meet the requirements of customers to mix high viscosity materials, we have made the following design:
1. Use frame type stirring paddle.
2. Using 1.5KW high-power geared motor, connect the inverter to control the speed, the complaint range is 0-50 rev / min.
3. The inside of the kettle body is sprayed with a Teflon coating of 0.8 mm to prevent the material from sticking.
4. Remove the lowering valve from the lower part of the escalator and switch to the dumping structure of the kettle body.
Product Display
Technical Parameter of Stainless Steel Chemical Reactor
Stainless Steel Chemical Reactor | |
Capacity | 10L |
Material of kettle body | stainless steel 304,Internal spraying of PTFE |
Heating temperature | Room temperature -200ºC |
Heating power | 3KW |
Temperature control method | Intelligent temperature control |
Stirring types | Framed agitation |
Mixing speed | 0-50rpm |
Motor power | 1.5KW |
Vacuum degree | -0.098Mpa |
Lifting method | Electric lifting of mixing mechanism |
Lifting stroke | 600mm |
Lifting power | 100W |
Dumping method | Manual dumping of kettle body |
Tipping angle | 0-90° |
Voltage/frequency | 220V/50Hz |
The accessory product is a vacuum pump
Workshop
Q: What kind of payment term do you accept?
A: Normally we accept TT, Paypal, Western Union, Alibaba Escrow, and L/C. The exactly term with be discussed during the deal.
Q: Can the mixing motor be replaced with a low-power geared motor?
A: yes.
Q: What anti-corrosion treatment can be done inside the reactor?
A: Spray anti-rust paint or spray PTFE layer or lining enamel.