Standard Aluminum Electrolytic Capacitor 125 degree for 2000H
Standard Aluminum Electrolytic Capacitor 125 degree for 5000H
Standard Aluminum Electrolytic Capacitor 130degree for 4000H
Specifications
ItemsCharacteristics
Rated Voltage Range: 6.3~450V. DC
Operating Temperature
Rang-55~+125degree(6.3V~63V); -40~+125degree(80V~450V)
Capacitance Tolerance± 20%(M) (25degree, 100 or 120Hz)
Leakage CurrentI≤ 0.02 CV or 3(μ A) (6.3V~100V) I≤ 0.03 CV +10 (μ A ) (160V~450V)
Where, I: Max. Leakage current(μ A), C: Nominal capacitance(μ F), V: Rated voltage(V)(At 25degree after 2 minutes)
Dissipation Factor tanδ
Rated voltage(VdC)6.31016253550~100160~250350~450
Tanδ (Max. )0.240.200.160.140.120.100.120.15
(25degree, 100 or 120Hz)
A When nominal capacitance exceeds 1000μ F, add 0.02 to the value above for each 1000μ F increase.
Low Temperature
Characteristics
(Max. Impedance Ratio)Impedance ratio at 100Hz or 120Hz shall not exceed the values given in the below table.
Rated voltage(VdC)6.3~1625~6380~100160~250350~450
Z-40degreeZ+degree4610
Z-55degreeZ+20degree54///
When nominal capacitance exceeds 1000μ F, add 1 to the value above for each 1000μ F increase.
Shelf LifeAfter storage at 125degreefor 1000 hours, the capacitors shall meet the following requirements. (500 hours for 350V~450V)
Capacitance Change≤ ± 20% of the initial value
D. F. ( tanδ )≤ 200% of the initial specified value
Leakage Current≤ 500% of the initial specified value
Load LifeAfter application of rated voltage with rated ripple current for the 2000hours at +125degree, the capacitors shall meet the following limits.
Capacitance Change≤ ± 20% of the initial value
D. F. ( tanδ )≤ 200% of the initial specified value
Leakage Current≤ The Initial specified value
OthersMeet Q/RME 40-2008, GB/T 5993-2003
Specifications:
| Items | Characteristics |
| Rated Voltage Range | 6.3~450V.DC |
| Operating Temperature | -40ºC~+105ºC |
| Range |
| Capacitance Tolerance | ±20%(M) (25ºC,100 or 120Hz) |
| Leakage Current | I≤0.01 CV +10 (μ A ) |
| Where,I:max.leakage current(μA),C:Nominal capacitance(μ F),V:Rated voltage(V)(At 25ºC after 2 minutes) |
| Dissipation Factor | Rated voltage(VdC) | 6.3 | 10 | 16 | 25 | 35 | 50~100 | 160~450 |
| tanδ | tanδ(Max.) | 0.24 | 0.2 | 0.16 | 0.14 | 0.12 | 0.1 | 0.12 |
| | (25ºC,100 or 120Hz) |
| | When nominal capacitance exceeds 1000μF,add 0.02 to the value above for each 1000μF increase. |
| Shelf Life | After storage at 105ºC for 1000 hours, the capacitors shall meet the following requirements. |
| Capacitance Change | ≤±20% of the initial value |
| D.F.( tanδ) | ≤200% of the initial specified value |
| Leakage Current | ≤200% of the initial specified value |
| Load Life | After 2000 hours application of rated voltage with rated ripple current at +105ºC,the following limits specification shall be satisfied. |
| Capacitance Change | ≤ ±20% of the initial value |
| D.F.( tanδ) | ≤150% of the initial specified value |
| Leakage Current | ≤the initial specified value |
| Others | Meet Q/RME 08-2003, GB/T 5993-2003 |