Bale Splitter Machine
Usage
Vertical Hydraulic Automatic Rubber Bale Cutter is mainly used to cut the natural rubber, synthetic rubber, and other plastics materials, especially it is suitable to be installed near the rubber mixer to cut small piece of rubber. .
Structures
This vertical rubber cutter mainly consists of rubber knife, frame, cylinder, base, auxiliary table, hydraulic system, and electric system. The nylon plate is installed on the base under the cutting knife for protecting the edge of the cutting knife. When cutting the raw rubber, put the raw rubber under the rubber knife, then press the start button, the knife can cut the rubber. Two limit switches are installed on the frame to control the reversal valve to change the movement direction of the rubber knife, at the same time it protects the cover of the cylinder.
1. Version: XQL-80, XQL-120
2. Main purposes:
The machine applies to natural rubber. One of the necessary basic equipment for various rubber products factory. The machine adopts hydraulic control.
3. Structural characteristics:
3.1. The cast iron to improve the fuel tank, using seamless welding manufacturing. Improve the reliability of the fuel tank. The overall use of steel plates welded, light weight, high strength, beautiful appearance. Also improved hydraulic control system of power, low-noise smooth running and reliable.
4. After sales service
1. We will offer you two years guarantee
2. We will play you and givve you anwser within 24 hours
| Parameter | Version |
| XQL-80 |
| Knife width(mm) | 660 |
| Knife stroke (mm) | 660 |
| Total pressure of oil tank(kn) | 80 |
| Stroke time of knife(s) | 14-16 |
| Power (kw) | 5.5 |
| Size | 2122*1440*2059 |
| Weight (kg) | 1600 |