Digital Ultrasonic Cleaner Bath machine for Jewelry PCB Cleaner
 

Ultrasonic welding cleaner is widely used in both household or industrial applications. It has many advantages such as labor cost-saving, eco-friendly, higher efficiency, etc. K&M tech provides the equipment for your ultrasonic cleaning needs. 

The cavitation and direct inflow function are more often applied in the currently used ultrasonic cleaning machines. Cavitation function refers to the phenomenon of the rapid formation and inner implosion of the countless air bubbles inside the cleaning reagent. The blast waves generated thereafter wash away or peel off the dirt on the inside or the surface of the workpieces soaking under the cleaning liquid. As the ultrasound frequency increases, the bubbles number increases and the blast force weakens, Therefore, high-frequency ultrasound is especially suitable for the cleaning of small particles without damaging the surface of the workpiece.
 

1. Warning: Do not start the machine without water so as to prevent empty heating to damage the equipment.
2. Capacity description: The water quantity should be above 1/3 in the tank and the water quantity should be above 2/3 in the tank for the model with heating function.
3. To achieve a better cleaning effect, select and add targeted cleaning liquid according to the station of the product
4. Please keep the machine clean and cut off the power when not in use.
5. In a high-temperature environment, the machine may damage the electronic components. Please keep away from the power supply.
6. Avoid storing the machine in a damp environment.

1. What are the advantages of ultrasonic cleaning?
Reduce labor cost
No need to use the organic solvents
High-efficiency of cleaning & better cleaning result
Environmentally friendly
2. Is ultrasonic cleaning safe?
Yes, ultrasonic cleaning is considered safe for most parts, with proper operation and the use of the correct cleaning reagent, it will have economical and good cleaning results.
3. What frequency should I use for my workpieces?
It mainly depends on the workpieces size, cleaning requirement, cleaning process, pollutants, etc.
28kHz is more powerful mainly for Mechanical hardware, circuit board, electronics, etc.
40kHz is more suitable for precision cleaning like PCB boards, electronic parts, etc.
4. What are your machine's warranty and after-sales services?
We offer one year warranty for our cleaning equipment.
Broken parts will be replaced at our cost within the warranty. Technical support is also available after 1 year.