China Salon Use Vertical 808nm Diode Laser Hair Removal Machine, Find details about China 808nm Diode Laser, Laser Hair Removal from Salon Use Vertical 808nm Diode Laser Hair Removal Machine
Principle and Application
1. principle
Treatment principle is based on the role of selective photothermolysis, as hair follicle and hair shaft are rich in melanin, melanin in the hair bulb matrix distribution between cells and transfer to the structure of hair shaft, the regard melanin as target to do hair removal treatment, after the target and its carrier ( hair follicle and hair follicles surrounding tissues) absorb the tremendous energy, the temperature increased sharply, leading to hair follicle tissues and surrounding hair follicle tissues damage, hair loss the native environment, it must be completely removed.
2. Remove all kinds of hair on all kinds of skin, no pain.
Product parameters
Laser type | Semiconductor diode laser |
wavelength | 808nm |
energy | 1-120J/cm² |
Pulse delay | 1-100ms |
Pulse duration | 1-400ms |
frequency | 1-10Hz |
Spot size | 15*20mm,15*15cmm |
screen size | 8.0 inch touch screen |
Cooling System | Bald surface cooling |
Voltage power | 220V, 110V 50Hz 60Hz |
The instrument function
| 808nm laser hair removal is applied to various body parts, such as the hairline of the face, lips, hair, beard, armpit hair and body, limbs, hair, chest hair, bikini line, etc., which achieved the lose hair effect of the international standard . |
Technical advantages | (1)The place of laser head use sapphire to touch skin, so as to achieve the cooling effect to ensure the skin tissue free of damage and no discomfort in the hair removal process (2) No instructions light, laser head contact to where, where will light and begin to hair removal. (3)This machine is designed the latest technology experts operating system, it aims at the pulse width and energy what different parts and different thickness of the hair require and proceed automaticly the best parameter combination. |
Product advantage | 1. Freezing point painless hair removal 2. Apply to six skin type 3. Without any side effects 4. Deeper and more safe penetrate the skin 5. 15 * 15mm Broad Beam and quick treatment |
The best therapeutic effect
| 808 nm semiconductor laser is the best wavelength of pigment absorption, which can be absorbed by melanin of the hair follicle inside. hair removal is better than the traditional method of hair removal, hair removal required less times of treatment,The traditional hair removal methods cannot remove lips hair, etc.but it can be easily removed. |
Comfortable treatment experience | With adjustable 20-950ms pulse width, good absorption peaks, gentle mode of action ,it applies to all six categories of skin type and thickness of hair and combined with the TEC sapphire contact cooling system to maintained at -5 ° C to 5 °C, then skin feel the cool and freezing , thus it greatly reduce the pain of traditional hair removal methods, safety and comfortable, and it is very popular among the customers |
Rapid course of treatment | 15X15mm spot, a large area of skin can be treated in the first time,and to achieve the effect of rapid hair removal. |
The high cost performance | No any consumables, the lowest operating costs to obtain the largest return on investment. |
Installation
1. Connect the hand-piece,make sure the hand-piece connect firmly.
2. Affuse distilled water, after the water overflow the overflow hole, it's enough.
3. make sure the key is at off position, and the stop switch is at up.
4. connect power cord.
5. Switch the circuit breaker to the "On" position.
6. Switch the key to "on" position. At this time water circulation and the cooling system starts automatically.
7. After 1 minutes, turn off the machine, then affuse water again.
8. Then turn on the machine again, It means you can fully assemble cooling system with handpiece.
9. Adjust proper parameter, start treatment.
10. When replace water
1). Drain the remaining water which contains in the handle. Pay particular attention as not to spill any water on the electronic terminals. Wipe off any spilled water with a soft absorbent cloth.
2.).Replace water every 2-3 months.
RFQ
1. Do you have any warranty?
Yes, we have. 12 months warranty.
2. How is your after-sale service?
We have a professional technology supporting team for your timely services. You can get the help you need in time by telephone, webcam, online chat (Google talk, Facebook, Skype). Please contact us once the machine has any problem. Best service will be offered.
3. What certification do you have?
All of our machines have the CE certification which ensures the quality and safety. Our machines are under strict quality management to ensure good quality. Because we fully understand that it will be a great trouble if machine have any problem during working at oversea.
4. Will you teach how to use the machine?
Yes, we can provide a complete user manual and usage video for instruction and application. And 24/7 online consultant service ensure you whatever problem and whenever you meet, you can solve easily. It is easy to operate by anyone with the instructions.
5. Why should you choose us?
Powerful factory, giving the competitive price and best technology support 7-years' experience in producing beauty machine, strong R&D 1 years-warranty and 8/24 online after-sale service CE Certification, the key for you to legally use and sell the machine Diversity of customized service, strong OEM & ODM capability available