Stainless Steel Gas-Liquid Knitted Wire Mesh For Filter

1. Wire diameter range: 0.10mm-0.55mm (common wire through is: 0.20mm - 0.25mm).

2. Hole size: (2x3mm) to (4x5mm) to the (12x6mm) also according to customer requirements on the hole size fine-tuning. The cutout form of the large hole and the orifice cross-arranged (the size of the holes in the longitudinal direction is the same, width is different).

3. The surface condition of the Knitted Wire Mesh: The flat-type mesh surface and pressed into a corrugated bellows-type network surface (the width of the corrugations and the depth of the different specifications)

4. The common width of Knitted Wire Mesh: 40mm, 80mm, 100mm, 150mm, 200mm, 300mm, 400, 500 mm, 600mm, etc...

5. The main material of Knitted Wire Mesh: Aluminum wire, stainless steel wire, galvanized wire, fibre wire, plastic wire, PP, PC, PE, PVC, etc.

6. Main purposes: Mainly used for processing demister for separation of the gas inside the droplets. Can also be extrusion molding, for manufacturing a filtration device.