Products

Micro Wave Remote Control High Frequency RFID Reader Writer for Industrial Use

China Micro Wave Remote Control High Frequency RFID Reader Writer for Industrial Use, Find details about China High Frequency RFID Reader, RFID Reader from Micro Wave Remote Control High Frequency RFID Reader Writer for Industrial Use

Model NO.
RFH-1332-114D
Structure
RFID Card
Data Transmission Mode
Parallel
Application Field
Non-Fiscard
Trademark
Yuanben
Transport Package
Standard Export Package
Origin
Shanghai
Model NO.
RFH-1332-114D
Structure
RFID Card
Data Transmission Mode
Parallel
Application Field
Non-Fiscard
Trademark
Yuanben
Transport Package
Standard Export Package
Origin
Shanghai
High Frequency RFID Reader (13.56 MHz)

P/N: RFH-1332-114D
  1. Overview
The RFID (Radio Frequency Identity) RFH-1332-114D is a non-contact high frequency RFID reader, specially designed for use in embedded applications such as address reading or proximity control of AGV and other industrial application. It can be worked in a variety of harsh environments. The RFID reader has anti-collision function, its operating frequency is 13.56MHz.

2. Key Features
Comply with ISO 15693 Protocol and ISO/IEC 18000-3 Protocol; ISO14443A protocol.
Support NXP I. CODE SLI and other tags in line with the ISO15693 Protocol.
Support reading and writing, no data missed reading.
RS 485 with Cable(1.0M long), RS 232 and Ethernet (TCP/IP) can be selectable.
Built in RFID antenna (Integration Design of Reader and Antenna)
Read / write distance 70-90mm (industry Environment), reading time is less 20ms /8bit.
Good package IP65, PBT engineering material suit industry environment application
3. Applications
Address reading or proximity control of AGV,forklift and industrial production line material identification application.

4. Technical Data sheet
Operating Frequency13.56MHz 
Working Voltage10-30Vdc
Working current<0.2A
Standard Interface ISO/IEC 15693 and 14443A
Compliance interfaceISO18000-3 mode
Maximum Reading distance70-90mm
Reading time20ms/8 bit
Radiation Power 2W 
InterfaceRS232;RS485 and TCP/IP(opinion) 
Indication 2 Led ( red led for power, Green led for working )
Working Temperature -20ºC~+70ºC 
Storage temperature-20ºC~+85ºC 
Working humidity<95% 
Cable5 core shield (800mm) or (M12 opinion)
Color of HousingGreen Housing
Material of HousingPBT
Dimension As attached drawing
IP classIP65 Industry Environment


5. Dimension and picture                          

 Micro Wave Remote Control High Frequency RFID Reader Writer for Industrial Use


Micro Wave Remote Control High Frequency RFID Reader Writer for Industrial UseInstallation location dimension:4-φ3mm*6mm

6. Wiring Diagram
 
Cable numbercolorPin configure
2BrownVin   9-30vdc
4BlueGND
1WhiteA
5GreyB
Micro Wave Remote Control High Frequency RFID Reader Writer for Industrial Use




 7. RFID Sensor with Host Computer Communication Data Packet Format

This data message format is used for communication between the RFID (HF) sensor and the host computer (controller). The host computer sends commands (downstream) and the RFID sensor responds (upstream). The communication port baud rate is 9600, data is 8 bit, no odd check, stop bit is one bit.
Command format
 
Frame header
01		Data lengthData1Data2…Data NChecksum (CAL)End of frame
FD
Data length:The length of the Data1~Data N(=N);
Checksum(CAL):From the data length to Data N (N+1 number) sum, take the lower 8 bits.
Note:The data is a hexadecimal number in the table.
  1. Start to read tag
  2. Stop reading tag
  3. Reading 15693 tag data
010242478BFD
  010245448BFD
01035452Block number(0-1bit) CALFD
Respond
0104XXXXXXXXCALFD
Where from 3 to 6 bytes are read data (4 bytes).
  1. Writing 15693 tag data
01075457Block number
(0-1B) 		XXXXXXXXCALFD
Where from 6 to 9 bytes are written data (4 bytes)
Respond (success)
01045355434332FD
  1.  Reading mifare tag data(S70 card)
01034D52Block number(0-3F)CALFD
Respond(success)
0110XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXCALFD
Where from 3to 18 bytes are read data(16 bytes).
  1. Writing mifare tag data(S70 card)
01134D57Block number
(00-3F)		XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXCALFD
Where from 6  to 21  bytes are written data (16 bytes).
Respond(success)
01045355434332FD
Instruction:
  1. The RFID sensor automatically reads the tag when it is turned on.
  2. The RFID sensor reads the data stored in the tag automatically when the tag is in reading area.
  3. The RFID sensor stops reading the tag automatically after receiving the command to stop reading; and it can be restarted read the card after receiving the reading tag command.
  4. when the mifare tag is used, block cannot be read and written with block numbers 3+4n (n=0, 1, 2...), In other words, the blocks cannot be read and written with blocks numbers 3,7,11....

You Might Also Like