Products

CNC Over Under Voltage Protection Relays Mora DIN Adjustable

China CNC Over Under Voltage Protection Relays Mora DIN Adjustable, Find details about China 1-63A, CNC Electric from CNC Over Under Voltage Protection Relays Mora DIN Adjustable

Model NO.
YC9VA
Rated Voltage
AC230V
Electrical Life
100000 Times
Product Keywords
Over Under Voltage Protection Relays
Protection
IP20
Rated Frequency
50Hz
Installation
35mm DIN Rail
Trademark
CNC
Origin
Zhejiang, China
Model NO.
YC9VA
Rated Voltage
AC230V
Electrical Life
100000 Times
Product Keywords
Over Under Voltage Protection Relays
Protection
IP20
Rated Frequency
50Hz
Installation
35mm DIN Rail
Trademark
CNC
Origin
Zhejiang, China

CNC Over Under Voltage Protection Relays Mora DIN Adjustable

Product Description


YC9VA votage and current display relay is a microprocessor-based voltage monitoring device for single-phase AC networks to protect electrical equipment from surge voltage. The device analyzes the main voltage and displays its current value on a digital indicator. Load is switched by electromagnetic relay. The user can set the current voltage value and delay time through the button. The value is stored in non-volatile memory. Aluminum wires and copper wires can be used for connection.

CNC Over Under Voltage Protection Relays Mora DIN AdjustableCNC Over Under Voltage Protection Relays Mora DIN AdjustableCNC Over Under Voltage Protection Relays Mora DIN AdjustableCNC Over Under Voltage Protection Relays Mora DIN Adjustable

CNC Over Under Voltage Protection Relays Mora DIN Adjustable

ParameterData
Rated power supply voltageAC230V
Rated frequency50Hz
Maximum voltage adjustment range230V~300V
Minimum voltage adjustment range120V~210V
Range of adjustment of the maximum current1A~63A
Deviation2%
Maximum action time<275V: 0,1s, ≥275V: 0,02s
Delay time adjustment range1-90s
Minimum action time0.5s (≥160V); <0.1s(<160V)
Delay time adjustment range, overcurrent trip time1-90s (Inom <Iism <Imax :); 0.1s (Iism≥Imax)
Voltmeter accuracy≤1%
Rated insulation voltage400V
Output contact1NO
ProtectionIP20
Pollution3
Electrical life100000 times
Mechanical life1000000 times
Altitude≤2000m
Operating temperature-5°C~40°C
Relative humidity50% at 40ºC (non-condensing)
Storage temperature-40°C~55°C
Installation35mm DIN rail
Range of adjustment of the on-delay time1-90s
 

Operation and installation functions

When a voltage is applied to the device, the digital indicator will display the current value of the voltage in the network.
A flashing light indicates that there is no voltage on the output of the device. If the supply voltage is within the set range, after Ton (default is 30 seconds), the load will turn on and the indicator will stop flashing. If the voltage is not within the specified range, the load will not be connected to the line until the voltage returns to normal. Meantime, if the voltage is lower than the set lower limit during the restart, the error indicator will flash. If the voltage is higher than the set upper limit, the error indicator will remain on.

1.Install and secure the relay.
2.Connect the wires to the relay according to the schematic.
3.Set the desired voltage value.
4.Set the required response time.
CNC Over Under Voltage Protection Relays Mora DIN Adjustable
 

Company Profile

CNC Over Under Voltage Protection Relays Mora DIN AdjustableCNC Over Under Voltage Protection Relays Mora DIN AdjustableCNC Over Under Voltage Protection Relays Mora DIN Adjustable

 

You Might Also Like