Temperature FLOOR SENSOR For Electric Floor Heating. Universal NTC 10kohm 10ft Probe, Suitable For Most Heating Installations. Compatible With Honeywell Aube Ditra NuHeat SunTouch and More

• ACCURATE TEMPERATURE SENSING - The Universal Floor Sensor accurately measures the floor temperature and communicates with the thermostat, to increase the comfort and efficiency of the floor heating system
• UNIVERSAL - NTC 10k ohm Probe, Compatible with all types of radiant heating systems, and compatible with most types of thermostat controllers, including Aube, Honeywell, NuHeat, SunTouch, Ditra and OJ Electronics
• FLEXIBLE sensor cable is easy to install and can be cut short or lengthened as required. The 10 foot (3m) length is suitable for most standard installations, for optimal placement in the heated room for accurate temperature measuring
• SIMPLE TO INSTALL - neutral polarity floor sensor is quick and easy to connect to your thermostat. Tough cable insulation protects against damage during flooring installation. Resistance measures 8 to 10 kohm for temperatures between 68degF and 86degF.
• TIP OF THE DAY # BETTER safe than sorry, install a back-up floor sensor to avoid unnecessary lifting of floors should primary sensor fail. Thermistor reads 10k ohm as 77degF/25DegC.

Product description

THE UNIVERSAL FLOOR SENSOR by Ocsonic is a reliable and accurate temperature probe designed to monitor the temperature of the floor heating system and communicate with the thermostat controller, to accurately adjust the temperature of the heating system to ensure optimal comfort levels in the room.

★ WHY DO I NEED A FLOOR SENSOR? Accurate temperature monitoring can greatly increase the comfort and economy of a radiant heat system. Certain types of flooring (e.g. laminate wood floors) require a floor sensor, as per the manufacturer's instructions, to limit floor temp. 

★ HOW DOES IT WORK? The thermistor changes its resistance reading according to the temperature that surrounds the probe. This reading is communicated to the thermostat, the thermostat interprets resistance reading and adjusts heating system accordingly. 

★ HOW DO I INSTALL IT? The temperature sensor probe must be taped or glued to the floor substrate between two of the floor heating cables. The connections on the end of the Floor Sensor are connected to the correct terminals on the thermostat controller. 

Technical Details