Products

Hair Dryer Test Home Appliance Test Equipment
Hair Dryer Test Home Appliance Test Equipment

Hair Dryer Test Home Appliance Test Equipment

China Hair Dryer Test Home Appliance Test Equipment, Find details about China Home Appliance Test Equipment, Hair Dryer Test Equipment from Hair Dryer Test Home Appliance Test Equipment

Model NO.
QX-PN350
Loading Method
Dynamic Load
Display
Needle
Control
Computer Control
Weight
100-500Kg
Power Source
AC380V
Oil Cylinder Position
No
Trademark
ALIISON
Transport Package
Wooden Box
Specification
1250*650*1540
Origin
Made in China
Model NO.
QX-PN350
Loading Method
Dynamic Load
Display
Needle
Control
Computer Control
Weight
100-500Kg
Power Source
AC380V
Oil Cylinder Position
No
Trademark
ALIISON
Transport Package
Wooden Box
Specification
1250*650*1540
Origin
Made in China
Hair dryer test equipment
Introduction:
   It is mainly used for continuous and periodic aging test of hair dryer. Through the control system setting, the current, voltage, test times, time and test cycle of the test product are monitored and the relevant test data are recorded.
1.Technical characteristics:
2.Detection station: 18 stations
3.Set the test time and adjust the voltage and current
4.according to your own needs; Set the upper and lower limits of test times, time and current alarm, and display each station independently; 5.Equipped with smoke alarm, audible and visual alarm and automatic power-off function;
6.The upper, middle and lower three-layer structure, each layer containing 6 products
7.One load output socket in front of each station
8.The main power input is through the air switch, ≥ 80A;
9.Equipped with leakage protection switch and over-current and over-voltage protection device;
10.Voltage: 0-250V
11.External dimension: 1800mm×650mm×1700mm
12.Weight: 230Kg
13.Power supply: 0-380V / AC   50Hz/60Hz  3.5Kw 14.Equipment size: 1800×750×1750m
-------------------------------------------------------------------
Hair Dryer Test Home Appliance Test Equipment
Swing test machine
Introduction:
   According to the test standards: UL, IEC, VDE, specially test the bending strength of power plug leads and wires. The test method is to fix the product on the fixture and load a certain load weight. During the test, the fixture swings left and right. After a certain number of times, check the disconnection rate; or when it is unable to power on and bear the test load, check the total number of swings. The machine can automatically count, bend the test sample until it cannot be powered on, and automatically stop the machine.
Technical characteristics:
1.Fixture: 5 stations;
2.Swing angle: 0-90 ° positive and negative continuously adjustable; 3.Swing speed: 0-60 times adjustable;
4.Automatic counter: 6 counts respectively;
5.Load weight: 50, 100, 200, 300, 500g
6.With or without load test selection function;
7.Load range: AC0-30A or DC0-5A (adjustable in five groups independently);
8.Size: 1250mm x 60mm x 1200mm;
9.Weight: one for each of 100, 120, 150, 200, 300 and 500g;
10.Power supply: 0-380V / AC   50Hz/60Hz  1.5Kw
11.Optional function: load voltage 0-300V adjustable, load current 0-30A;
12.Equipment size: 1200×450×1250mm
-------------------------------------------------------------------
Hair Dryer Test Home Appliance Test Equipment
Hair dryer smoke detection tooling
  Introduction: The inspection tooling is mainly used for the inspection of the parts and components of the hair dryer. It is suitable for the quick inspection equipment of the production line and the inspection of the semi-finished products of the hair dryer. The tooling is operated by two stations and one person.  It mainly detects the heating of semi-finished products under the condition of burning smoke, and judges whether the products are qualified or unqualified through time.
Technical characteristics:
Output voltage: AC220V / dc0-36v (adjustable); Time setting: 0 ~ 99999 H / min / S (adjustable);
Time mode selection: long time operation/periodic operation; Independent time / cycle setting of each station;
Function: time setting /
periodic setting; Case: plexiglass;
Design principle: production line full inspection tooling;
Water pump clamp: fast clamping;
Control interface, mechanical control;
Power supply: 0-380V / AC   50Hz/60Hz  3kw;
Equipment size: 450×200×400mm.
-------------------------------------------------------------------
Hair Dryer Test Home Appliance Test Equipment
Hair dryer life test equipment
Introduction:
   The test tooling is mainly used for the performance test of the whole electric hair dryer, which is suitable for the fast test equipment of the production line. It can judge the blocking time and temperature reset time of the finished electric hair dryer in the fan. The tooling is operated by two stations and one person.   It mainly detects the operation and reset conditions of the internal temperature controller of the hair dryer, and judges whether the product is qualified or not through the time.
Technical characteristics:
Output voltage: AC220V / DC0-36V (adjustable);
Time setting: 0 ~ 99999 H / min / S (adjustable);
Selection of time mode: running at turning block time / running at reset time;
Independent time / cycle setting of each station;
Function: time setting / periodic setting;
Case: plexiglass;
Design principle: production line full inspection tooling;
Water pump clamp: fast clamping;
Control interface, mechanical control;
Power supply: 0-380V / AC   50Hz/60Hz  3kw
 Equipment size: 450×200×400mm.
-------------------------------------------------------------------
Hair Dryer Test Home Appliance Test Equipment



Hair Dryer Test Home Appliance Test Equipment
 

You Might Also Like