Products

Vial Injection Powder Washing Drying Filling Capping Labeling Production Line for (pharmaceutical)
Vial Injection Powder Washing Drying Filling Capping Labeling Production Line for (pharmaceutical)

Vial Injection Powder Washing Drying Filling Capping Labeling Production Line for (pharmaceutical)

China Vial Injection Powder Washing Drying Filling Capping Labeling Production Line for (pharmaceutical), Find details about China Vial Injection Powder Production Line, Vial Injection Powder Machine from Vial Injection Powder Washing Drying Filling Capping Labeling Production Line for (pharmaceutical)

Model NO.
Vial Injection Powder
Customized
Non-Customized
Condition
New
Warranty
1 Year
Trademark
Sinopharm
Transport Package
Wooden Package
Specification
Customized
Origin
China
Model NO.
Vial Injection Powder
Customized
Non-Customized
Condition
New
Warranty
1 Year
Trademark
Sinopharm
Transport Package
Wooden Package
Specification
Customized
Origin
China
Vial Injection Powder Washing-Drying-Filling-Capping-Labeling Production Line
Vial Injection Powder Washing Drying Filling Capping Labeling Production Line for (pharmaceutical)
Vial Injection Powder Washing Drying Filling Capping Labeling Production Line for (pharmaceutical)
 
Introduction
The FZLD model vial injection powder washing-drying-filling-capping-labeling production line is composed of the QCL series vertical ultrasonic bottle washing machine, ASMR tunnel hot air circulation sterilizing oven, KFJ series digital screw injection powder filling machine, KGL capping machine and TLJ labeling machine, whilst the three component machines can also be used independently. Suitable for production of vial injection of 7-25ml, it can complete more than 20 procedures such as spray and water filling, ultrasonic rough washing, bottle exterior wall washing, bottle interior wall continuous twice circulation water washing, primary blowing, primary fresh water washing, continuous twice blowing, bottle exterior wall blowing, preheating, drying, sterilizing, pyrogen removing, cooling, filling, stoppling, capping, labeling, and etc.
 
The whole line adopts PLC main control, frequency converter and touch screen control technology with stable and reliable running. The touch screen can display running dynamics of each single machine, water pressure, air pressure, wind pressure and temperature at each control point. The display of each on-off status and faults, fault self-diagnosis, fault analysis and eliminating methods realizes automatic control during the whole production. The production line is provided with the three-machine automatic control and balancing device to ensure balanced and reliable production.

Parameters 
Model7-25ML GB Vial
Capacity300pcs/min ~600pcs/min
Qualified rate of bottle washing≥99%
Breakage rate of bottle washing≤0.1%
Sterilizing temperature(°C)300ºC-350ºC
Filling tolerance(%)≤±3%(0.1-10h)
Qualified rate(%)≥99%
Air Cleanness (Class)100
Power380v,50HZ, 96kw~235.5kw
WeightAround 8200KG
Dimension2000×1750×2370mm
 
Technical characteristics:
  1. The bottle washing machine adopts mechanical hands to clamp the bottles, suitable for vials of various specifications.
  2. The water-gas spray needles adopt the reciprocating tracking insertion method for bottle washing, featured by excellent washing effect and energy saving. It is also provided with a device that prevents the needle holder from shaking to enhance the accuracy of the spray needle's insertion into the bottle and reduce the occurrence of needle breakage.
  3. The water and gas pipes are totally separable from the spray needles, so that cross contamination is avoided and GMP requirements are satisfied.
  4. The buffer block is installed before the bottle feeding screw of the bottle washing machine to protect the screw and reduce bottle breakage.
  5. Bottle discharging is realized by the integral imported synchronous belt that is connected to the bottle pushing block to convey ampoules , a structure that ensures stable and reliable operation.
  6. The oven adopts hot air circulation heating to achieve temperature and energy saving.
  7. The oven is provided with the function of protecting against sudden power-off to ensure safe running.
  8. The oven can be equipped with the circulation water cooling device that does not consume wind volume in the room, reduces the risk of unbalanced differential pressure in the room and achieves good cooling effect.
  9. The oven can be equipped with the differential pressure automatic balancing and regulating system to reduce the problems of deviation at the high temperature section caused by unbalanced differential pressure in the room and oven, temperature rise in the filling room, washing and drying room, and etc.
  10. The oven is provided with DOP inspection ports (including inspection ports for wind pressure, wind speed and dust particles).
  11. The cooling section in the oven can be provided with the sterilization function (specially chosen by FDA).
  12. The oven mesh belt can be equipped with the ultrasonic and CIP cleaning systems.
  13. The oven cavity can be subject to all-round, multi-angled high pressure water washing.
  14. The filling machine adopts the world's most advanced design concept, featured by high speed, accurate filling and convenient replacement of parts.
  15. The filling machine adopts the AC servo motor to drive the filling screw to turn with accurate filling volume.
  16. The adjustment of filling volume of the filling machine can be realized through the touch screen.
  17. The filling machine can be equipped with the 100-grade circulation laminar flow hood.
  18. The filling machine is provided with the functions of no filling in case of no bottle and no stoppling in case of no bottle.

Our Company

Vial Injection Powder Washing Drying Filling Capping Labeling Production Line for (pharmaceutical)

China Sinopharm International (Shanghai) Co., Ltd. is a comprehensive commercial service enterprise centering international pharmaceutical business.

It is a wholly-owned subsidiary under China Sinopharm International Corporation and is affiliated to China National Pharmaceutical Group Corporation (referred to as "Sinopharm Group"), a Fortune Global 500. Founded in 1985, the company has an net asset of nearly 200 million yuan. It has complete commercial facilities and 23,000 square meters of properties including an office building and shopping malls in Shanghai's West Nanjing Road commercial area and multiple warehouses. International business are carried out based on the platforms of Sinopharm Group and Sinopharm International Pharmaceutical and aims to spread China's high-quality pharmaceutical products and services to the world.

Through close cooperation with major domestic pharmaceutical companies, high-quality pharmaceutical products and overall solutions are provided to overseas customers. We are a well-known pharmaceutical enterprise in China with partners extending to more than 80 countries and regions around the world.

You Might Also Like