Products

Silicone Rubber for Cupcake Mould and Baking Cups

China Silicone Rubber for Cupcake Mould and Baking Cups, Find details about China Silicone, Silicone Rubber from Silicone Rubber for Cupcake Mould and Baking Cups

Model NO.
HY-E series silicon
Sample
Available
Purity
100%
Certifications
RoHS, MSDS, SGS, ISO9001:2000
Minimum Order Quantity
200 Kilogram
Brand Name
Hong Ye Silicone Rubber
Place of Origin
Guangdong China
Application
Silicone Rubber for Mold Making
Trademark
Hong Ye silicone rubber
Transport Package
20kg/Drum, 200kg/Drum
Specification
RoHS, MSDS, SGS, ISO9001: 2000
Origin
Shenzhen, China
HS Code
39100000
Model NO.
HY-E series silicon
Sample
Available
Purity
100%
Certifications
RoHS, MSDS, SGS, ISO9001:2000
Minimum Order Quantity
200 Kilogram
Brand Name
Hong Ye Silicone Rubber
Place of Origin
Guangdong China
Application
Silicone Rubber for Mold Making
Trademark
Hong Ye silicone rubber
Transport Package
20kg/Drum, 200kg/Drum
Specification
RoHS, MSDS, SGS, ISO9001: 2000
Origin
Shenzhen, China
HS Code
39100000

 

silicone rubber for cupcake mould and baking cups

  Description silicone rubber for cupcake mould and baking cups
HY-E620 is a kind of two part silicone rubber in addition cure or platinum cure type with mixing ratio of 1:1 or 10:1 . It can cure at room temperature as well as under heat . It's a kind of food grade silicone and mainly used for mold making.
Silicone Rubber for Cupcake Mould and Baking Cups

Application silicone rubber for cupcake mould and baking cups
HY-E620 silicone rubber is mainly used for making molds of concrete stone,GRC,polyurethane products ; wax, candle decoration ; rapid prototyping and tyre molds; chocolate,candy and similar products .

Technical Parameters  

ModelColorMixing ratio (%)Pot life (mins,
under 25ºC)		Curing time
 		Hardness  ( Shore A )Tensile-
strength  (MPa)		Tear-
strength (kN/m)		Viscosity
(After A/B mixed ,mPa.s)		Shrinkage
rate (%)		Elongation
(%)
 HY-E620Translucent1:1 or 10:130-404-5(hrs under 25ºC)
20-30 (mins under 60ºC)		20±2
7.5±1.0
 
30±5
 
5000±1500
 		≤0.1%  400%

Characteristics silicone rubber for cupcake mould and baking cups 
*An exceptional fluidity and good operability, easy to demold
*Good tensile and tear strength
*Outstanding bubble releasing
*Non-deformation
*Low shrinkage
*Aging resistance ,high temperature resistance (200ºC)
*Environmentally, food-grade

Operation instructions
Step 1: prepare the original molds
Prepare an perfect original mold and clean it totally before operation .
*Notes:Make sure your original molds and operation tool cleaned up totally to avoid uncure problem .

Step 2: Take 100 G part A and 100 G part B (Or 100 G part A and 10 G part B) and mix them evenly.
*Notes: Addition cure mold making silicon rubber is two part flowing liquid , Pls follow the step strictly:
         1.Weigh the two part exactly by electronic weight..
If any part not in exactly weight , it may cause changing of hardness , or even cause uncure problem.
         2.Mix part A and part B evenly.
Otherwise the silicon rubber will be partly solidified and this will give birth to difficulties in your final operation. What's more, the finished molds will meet a short life. All of these will cause a waste of silicon rubber.
Step 3: Vacuum pumping
Without exception, this step takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.

Step 4: Pouring casting or Brush operation
*Notes:1. For simple pattern products we suggest use pouring operation way , which will be very easy to operate and demould. Pourable silicone require light viscosity which will be easy to flow smoothly and easy to de-air .
        2.For delicate pattern products we suggest use brushing operation way , which can copy the pattern exactly . Brushable silicone require high viscosity which won't be easy to flow away and easy to brush . 
        3. We suggest to set the silicone mold for another 12 hours after demould before put into large production .

Warm tips :
  1. As addition cure silicone is a kind of platinum cure system ,which will be easy to cause uncure problem ,so

Kindly follow the tips below :
*Do not mix with liquid condensation silicone rubber or even the tool which used for condensation silicone
*Do not mix with organic matter which contains N, S, P organics and ionic compound like Sn, As,Hg, Ph,
*Do not add any pigment or powder into the addition cure silicone rubber without any testing to prevent uncure problem

Package
20KG/drum vacuum packing for part A + 20KG/drum vacuum packing for part B
200KG/drum packing for part A +200KG/drum packing for part B
Silicone Rubber for Cupcake Mould and Baking Cups

Shelf life
 Twelve(12) months when stored under dry and cool place by original package under 25ºC

If you are interested it, free sample is available, pls contact this lovely girls, thanks.

You Might Also Like