Products

Hthl- 100p Portable Automatic Loop Contact Resistance Tester for High Voltage Switch

China Hthl-100p Portable Automatic Loop Contact Resistance Tester for High Voltage Switch, Find details about China Resistance Ohmmeter, Loop Resistance Tester from Hthl-100p Portable Automatic Loop Contact Resistance Tester for High Voltage Switch

Model NO.
HTHL-100P
Accuracy
±(0.5% Rd+2D)
Continuous Working Time
5s~599s
Display
LCD
Communication Mode
USB
Power Supply
AC220V±10% 50Hz
Power of The Whole Machine
600W
Maximum Storage Record
200
Temperature
-10ºC~40ºC
Humidity
≤80%Rh
Dimension
360×300×250 mm
Weight
8kg(Not Including Accessory)
Certificate
Ce/ISO
Trademark
HV TEST
Transport Package
Carton or Wooden Case
Specification
see details
Origin
China
HS Code
9030332000
Model NO.
HTHL-100P
Accuracy
±(0.5% Rd+2D)
Continuous Working Time
5s~599s
Display
LCD
Communication Mode
USB
Power Supply
AC220V±10% 50Hz
Power of The Whole Machine
600W
Maximum Storage Record
200
Temperature
-10ºC~40ºC
Humidity
≤80%Rh
Dimension
360×300×250 mm
Weight
8kg(Not Including Accessory)
Certificate
Ce/ISO
Trademark
HV TEST
Transport Package
Carton or Wooden Case
Specification
see details
Origin
China
HS Code
9030332000
Hthl-100p Portable Automatic Loop Contact Resistance Tester for High Voltage Switch
Hthl-100p Portable Automatic Loop Contact Resistance Tester for High Voltage Switch
Hthl-100p Portable Automatic Loop Contact Resistance Tester for High Voltage Switch
Hthl-100p Portable Automatic Loop Contact Resistance Tester for High Voltage Switch

Brief introduction
Nowadays Power Systems widely use model QJ44 DC double arm bridge to measure contact resistance (DC resistance and Loop resistance of high-voltage circuit breaker) while the minimum current of such model is 1mA which hardly find the decrease of cross-sectional area of transformers' conductive circuit conductor. The measurement of loop resistance of high voltage switchgear is affected by oil layer and oxide between static and dynamic contact port, so the resistance measurement value will be several times larger, and cannot reflect the true value of contact resistance. Therefore, the Ministry of Electric Power in national standards SD301-88 "AC 500KV Electrical Equipment Transfer and Preventive Test Procedure" and new version of " Electrical Equipment Preventive Test Procedure" stipulate that the testing current of circuit breaker and isolating switch contact resistance is not less than 100A to ensure accurate test results.
HTHL-100P Digital Low Resistance Ohmmeter measures up to the latest power system standards--DL/T845.4-2004 designed for measuring loop resistance of Switching Control Equipment using High-frequency switching power supply technology and digital circuit technology. Test current of the Tester is DC 100A which is recommended in the national standards. The tester can measure the loop resistance at this value and display the result in digital and with function of storage, printing and time setting. Another 50A is optional. It is high precision and good stability and can meet most power systems' requirements in onsite high-voltage switches maintenance and high-voltage switches factory loop resistance measurement.

Products features
1. High current, adopts new power techniques, can output current long time and continuously , overcome the malpractice of instantaneous current of the impulse type power, can effectively break through the oxide film of the switch contact, get accurate test results.
2. High stability, under strong interference, the last number displayed by the LCD within the range of ±1, with steady reading and good reproducibility.
3. High precision: adopts double channels high-speed 16bits Σ-Δ AD to sample, digital signal processing technique, the maximum resolution up to 0.01μΩ.
4. Intelligent: use high performance CPU, system can switch the measurement range according the size of the signal when testing, ensure the accuracy. The over-temperature protection circuit can auto stop output the current when the device exceeds the rated temperature to ensure the safety.
5. High quality: key components adopts imported components, uses temperature compensating circuit in perfect design which eliminates the effect to test results by temperature, meanwhile strengthen the resistance to shock by using the military connector.
6. Powerful: current could be 50A, 100A, 150A or 200A measurement time 5s~599s, more powerful than other equipment.
7. Friendly man-machine interface: enter the data by rotating mouse, easy and convenient, can set the data, time by yourself, save and print the test results in time.
8. USB dump: Store the data to U disk by USB interface, combining PC software for further analysis and processing of the measurement data.
9. Easy to use: small in volume, light in weight.
 
Product parameters
Measurement range0~2999.9μΩ
Resolution0~99.99, 0.01μΩ100.0~2999.9, 0.1μΩ
Measured currentDC 50A, 100Afixed output
Accuracy±(0.5% rd+2d)
Continuous working time5s~599s
DisplayLCD
Communication modeUSB
Power supplyAC220V±10% 50Hz
Power of the whole machine600W
Maximum storage record200
Service conditionsTemperature -10ºC~40ºC, humidity:≤80%RH
Dimension 360×300×250 mm
Weight 8Kg(not including accessory)
Hthl-100p Portable Automatic Loop Contact Resistance Tester for High Voltage Switch
Hthl-100p Portable Automatic Loop Contact Resistance Tester for High Voltage Switch
Hthl-100p Portable Automatic Loop Contact Resistance Tester for High Voltage Switch
Hthl-100p Portable Automatic Loop Contact Resistance Tester for High Voltage Switch
Hthl-100p Portable Automatic Loop Contact Resistance Tester for High Voltage Switch
Hthl-100p Portable Automatic Loop Contact Resistance Tester for High Voltage Switch
Hthl-100p Portable Automatic Loop Contact Resistance Tester for High Voltage Switch


Common problem
1. Is your company a sales company or a manufacturer?
Wuhan Huatian Electric Power Automation CO., LTD.is an industrial and trade enterprise, with its own  factory, self-produced and self-sold. We were founded in 2004 and have fifteen years of production experience. Our company has reliable production lines, test rooms and R&D centers.

2. Whether the goods are in stock, whether they can be customized, and how long the delivery time is.
After the goods have been ordered, we can be made to order according to the special requirements of customers by using the latest technology. The delivery time is usually within 10 working days if there are no accidents.

3. Is the quality guaranteed?
In order to ensure quality, we use imported components in large quantities. After three times of quality inspection, the goods can be sent out, and the export is uniformly packed in non-fumigation wooden boxes.

4. What are the after-sales terms?
We offer free consulting service, one year warranty, and adopt various methods such as email communication, video calls, technology door-to-door, aiming to solve any after-sales problems in a timely manner.

5. What are the cooperative countries or regions?
Products have been successfully exported to the United States, Brazil, Australia, Russia, the Netherlands, Indonesia, Bangladesh, Iran, India, Saudi Arabia, Mongolia, Japan and other countries and regions. In the United States, India, Vietnam and other regions have cooperative distributors, can provide thoughtful services.


Contact us

Wuhan Huatian Electric Power Automation CO., LTD


Address: T4, No. 1, High-tech 2 Road,East Lake High-tech Development Zone,Wuhan
Zip code: 430074
Tel:(+86)-27-8745 7960 / (+86)027-87993136 / 13808601259
Fax: (+86)-27-8799 3136
 

 

You Might Also Like