Products

Automatic Metal Panel Two & Three Wave W Beam Highway Fence Guardrail Roll Forming Machine

China Automatic Metal Panel Two & Three Wave W Beam Highway Fence Guardrail Roll Forming Machine, Find details about China Guardrail Forming Machine, High Way Guardrail Machine from Automatic Metal Panel Two & Three Wave W Beam Highway Fence Guardrail Roll Forming Machine

Frame
400h Steel
Roller
Cr15 with Quenching
Material Thickness
2.0-3.0mm
Raw Material
Galvanized Steel
Shaft
45# Steel
Station
12 Station
Roller Material
Gcr15
Specification
15*1.55*1.3m
Origin
Hebei China
HS Code
84552210
Frame
400h Steel
Roller
Cr15 with Quenching
Material Thickness
2.0-3.0mm
Raw Material
Galvanized Steel
Shaft
45# Steel
Station
12 Station
Roller Material
Gcr15
Specification
15*1.55*1.3m
Origin
Hebei China
HS Code
84552210
 
Drawing :
Automatic Metal Panel Two & Three Wave W Beam Highway Fence Guardrail Roll Forming Machine
 
Equipment configuration

Manual Feeding device (3 T capacity), transmission, flattening device, before-punching device (2 sets), main machine and roller (including guide table), cutting (after roll forming) device, hydraulic system, electric control system, run out table, etc.
 

Production process
Manually uncoiling →Feeding & Correcting→ Seven rollers flattening device → Flat panel Punching→ Roll forming → Cutting after roll forming → Finished product.

Automatic Metal Panel Two & Three Wave W Beam Highway Fence Guardrail Roll Forming Machine

Raw material

Material spec

Colored steel sheet, galvanized steel sheet, aluminum sheet

Thickness of coil sheet

2.0-3.0mm

Machine details

Roller material

High grade no. 45 forged steel with 0.05mm hard chrome plating

Shaft material

High grade no. 45 carbon wrought steel

Cutting blade

Cr12 mould steel with quenched treatment

Diameter of shaft

90mm or as your requirement

Main frame

350 h steel

Hydraulic pressure

10-12mpa

Controlling system

Famous plc computer control

Material of  cutting table

Cr 12 mould steel with quenched treatment

Hydraulic oil

40# hydraulic oil

After sale-services

Delivery time

50workdays after receiving the deposit

Payments

30% deposit by t/t in advance and 70% balance after inspection confirmation before shipment

Automatic Metal Panel Two & Three Wave W Beam Highway Fence Guardrail Roll Forming Machine
 

5T hydraulic decoiler: 

Steel coil width: from 1000 mm to 1250 mm;
Internal diameter of coil: variable, from 480 mm to 530 mm
Maximal out diameter:2000mm
Maximum coil weight: 5000 Kgs;
Coil placement in the coil holder: hydraulic hoist;
Pulling of steel from the coil to the pulling mechanism for the start: manual;
Suitable of the pulling mechanism for all required thicknesses: included;
Device preventing unwinding of the coil from the coil holder: included;
Uncoiled metal compensator: included, assures even feeding at all production speeds;
Oil cylinder dia:120mm
Working speed: 0-15m/min adjustable
Main motor power: 5.5KW AC motor
Hydraulic power: 4kw
Automatic Metal Panel Two & Three Wave W Beam Highway Fence Guardrail Roll Forming Machine
 
Flattener:
The quantity of leveler rolls must be planned according to thickness 2.0mm to 3.0 mm.
Flattener roller: upper is 3 rollers, down is 4 stations(total is 7 rollers)
Flattener roller material: SAE 1045 thermal treatment hardness 48-52 HRC.
Diameter of flattener shaft:¢70mm, material is SAE 1045, hardening and tempering
Automatic Metal Panel Two & Three Wave W Beam Highway Fence Guardrail Roll Forming Machine
 


Punching:
Adopt Hydraulic punching
Diameter of cylinder¢140mm
Working pressure: 20mpa
The punches and dollies will be CR-12, hardness HRC 58-62
Hydraulic power :11KW
Dimensions: 1.5m* 1.1m* 1.2m
Automatic Metal Panel Two & Three Wave W Beam Highway Fence Guardrail Roll Forming Machine
 


Forming section:
Main motor power : 55 kw
Cycloidal pin wheel reducer : BWD14-43-55KW,
Place of Origin:Shanghai or Cangzhou
Transmission:Gear box 170#
Shaft diameter: ¢110 mm material: SAE1045 with quenching and tempering
Roller material:ASTM1045 chrome plated surface with chrome
Forming station: about 16 stations (according the final design)
Machine roll forming speed :0m-15m/min(without punching)
Machine Voltage, Frequency:Japan Yaskawa(380 V, 50 Hz, 3Phase)
Automatic Metal Panel Two & Three Wave W Beam Highway Fence Guardrail Roll Forming Machine
 

Cutting :
Shearing by hydraulic station
Material of blade:Cr12, 58-62 HRC hardness
Diameter of cylinder¢200mm
Working pressure:30mpa
Working range :80mm

 
Automatic Metal Panel Two & Three Wave W Beam Highway Fence Guardrail Roll Forming Machine
 

Out table:
Jointed by 60mm*40mm tube (adjustable)
One out table with two support roller
Size: 1.0m long*0.8mwide*0.6-1mhigh (adjustable)
Automatic Metal Panel Two & Three Wave W Beam Highway Fence Guardrail Roll Forming Machine
 
Hydraulic station:
Hydraulic power: 18.5kW
Working pressure: 20-25Mpa adjustable
Solenoid valve: 3 group
Hydraulic oil: 46# hydraulic oil
Color: Blue (or base on customer request)
Automatic Metal Panel Two & Three Wave W Beam Highway Fence Guardrail Roll Forming Machine
 
 

You Might Also Like