Products

Pressure Vessel Polish/ Boiler Polish Machine/Grinding Machine
Pressure Vessel Polish/ Boiler Polish Machine/Grinding Machine

Pressure Vessel Polish/ Boiler Polish Machine/Grinding Machine

China Pressure Vessel Polish/ Boiler Polish Machine/Grinding Machine, Find details about China Automatic Polish/Grinding Machine, Automatic Seam Polish /Grinding Machine from Pressure Vessel Polish/ Boiler Polish Machine/Grinding Machine

HS Code
8459290000
HS Code
8459290000
Technical Solution and Quotation of Polishing Machine
By mutual friendly negotiation, the demand side of of polishing machine reach the following agreement:
1. Processing objects and requirements:
1.1  Purpose: The equipment is mainly used for polishing stainless steel tank, cylinder,cone, dish head etc. The inner and outer walls grinding and polishing.
2.2  The workpiece range requirements:
workpiece diameter range:  800mm ~ 4300mm;
  horizontal polishing length: ≤3000mm (turn around can reach                      6000mm)
2.Equipment main structure and properties
Machine consists of cross hosts, standard polishing head, electric control system, pneumatic system and dish head rotaring table, tank turing roll.
2.1 Cross hosts:
    2.1.1  Column (moving stroke 1600mm), motorized arm (moving stroke 3000mm), slide raising drive mechanism and other components.
   2.1.2  Column, arm material respectively 500x300x10mm, 250x150x8mm square tube.
2.1.3  Arm driven by a gear, rack and reducer; column driven by sprocket, chain and  reducer.
2.1.4  Arm moving speed( up and down,right and left movement) is adjustable frequency by variable-frequency drive.
2.2 Standard polishing head:
  2.2.1  Dish polishing head and tank polishing head are used for grind and polish dish on rotaring table and tank on turing roll.
2.2.2  Adaptive constant floating structure, can be adapted to the workpiece ovality ≤50mm.
 
2.3 Dish head rotaring table:
2.3.1  Diameter ¢ 800mm, Rotary bearing maximum load: 2t;
2.3.2  Frequency control, adjustable speed, and is equipped with cylinder and head shared fixture, maximum clamping diameter of ¢ 4300mm workpiece;
2.3.3  Manually screw clamp, automatic centering.
 Rotary bearing  
2.4 Tank turing roll:
2.4.1  Maximum load: 5t, frequency control, adjustable speed.
2.4.2  Two driving wheels, two driven wheels.
2.4.3  Roll size: 250*100mm(diameter*width)
2.5 Electric control system, pneumatic system:
2.5.1  Electric cabinet: operator station,actuators, control loop. Actuator including: contactors, relays, variable-frequency drive etc.
2.5.2  Pneumatic part:pressure gauges, cylinders, pipes and other components, to achieve the polishing head feed / return and adaptive constant floating structure.
2.5.3  Electric control system and pneumatic system installed in the same Cabinet.
3. Main technical parameters:
3.1.  Polishing Motor power:  4kw ;
Belt size: 1880 × 50mm
Buffing wheel size:300*50*32mm
3.2. Dish rotaring table motor power: 1x0.75kw; Speed: 1-30rpm,     variable-frequency drive
      Tank turing roll motor power: 2x1.5kw;Speed: 1-50rpm, variable-frequency drive
3.3.  Polishing efficiency: Head 4-6 (m²/h); tank 8-12 (m²/h), Two polishing head,efficiency doubled.
Only one polishing head           Two polishing head
3.4. Power: AC three-phase 380V; 50HZ; Input power 16-20kw
3.5.The gas source:. 0.6 m³/ h ; 0.4 ~ 0 6Mpa;pipe:8x5mm
3.6.Processing noise: ≤75db(2 m measuring distance away from polishing head)
3.7.  Machine dimensions: length x width x height 6200x1500x3150mm(Foundation need build according to the drawing )
Pressure Vessel Polish/ Boiler Polish Machine/Grinding Machine
 Pressure Vessel Polish/ Boiler Polish Machine/Grinding Machine

You Might Also Like