The punching can be designed according to customers` requirements. The storage device will help to coordinate the operation of each part of this storage rack roll forming machinery so as not to produce speed conflict.
For different dimensions of racking products, users can adjust the product dimension by changing the spacer bush in the racking roll forming machine.
The design of this storage rack roll forming machinery enables the roll forming part to be changed quickly. That is why only one machine can produce several different profiles and the forming unit can be changed in a short time.

Storage rack usage:

 

Working flaw chart:

Decoiler --Punching --forming --cutting --stand 

 

Detailed show:
Manual decoiler:  
Coil inner Diameter: ¢460mm~520mm   
Max out diameter of the coil: ¢800mm
Expansion: Manual with brake
Max Coil Width: 500mm
Leveling device
7 rolls leveling, 3 rolls up and 4 rolls down
Diameter is Ø 80mm, chrome and HRC60 heat treatment to secure the smooth surface
Leveling Raw Material thickness:1.5-3.0mm
Max Leveling Raw Material width: 400mm
Punching Press machine
Press power:80t
Motor:4kw
Brand name: Hengshi
Hydraulic cutting
The cutter blade material: Cr12mov HRC58-62 degree
Blades number:1 set 
Cutting after forming: Cut the sheet after roll forming to required length 
Cutting motion: servo following cutting 
Material of blade: CR12Mov with heat treatment 
Length measuring: Automatic length measuring 




Control box
Power supplier: 380V, 50 Hz, 3Phase (adjusted with the requestment)
Length & quantity measurement automatically;
Length & quantity controlled by PLC
Length inaccuracy can be amended easily.
Control panel: Button-type switch and touch screen
The language in the touch screen: English and Chinese
Unit of length: millimeter (switched on the control panel)

Our workshop: