Polyvinyl Chloride Resin PVC Resin(ZL-PVCR)
Commodity: PVC resin
PVC resin is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity.
The PVC Resins are polymerized by suspension process, their appearance being in white powder form.
They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours.
Our PVC Resins are distinguished for their insulating, moisture-proof, oil-resistant, acid-resistant, and alkali-resitant properties.
| Type: | SG1 | SG2 | SG3 | SG4 | SG5 | SG6 | SG7 | SG8 |
| K value | 77-75 | 74-73 | 72-71 | 70-69 | 68-66 | 65-63 | 62-60 | 59-55 |
| Viscosity, ml/g | 156-144 | 143-136 | 135-127 | 126-119 | 118-107 | 106-96 | 95-87 | 86-73 |
| Average polymerization |
|
| 1350-1250 | 1250-1150 | 1100-1000 | 950-850 | 950-850 | 750-650 |
| Number of impurity particle max | 30 | 30 | 30 | 30 | 30 | 30 | 40 | 40 |
| Volatiles content % max | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 |
| Appearing density g/ml min | 0.42 | 0.42 | 0.42 | 0.42 | 0.42 | 0.45 | 0.45 | 0.45 |
| Residual after sieve 0.25mm mesh max | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| 0.063mm min | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 |
| Number of grain/400cm2 max | 40 | 40 | 40 | 40 | 40 | 40 | 40 | 40 |
| Plasticizer absorbency value of 100g resin | 25 | 25 | 25 | 22 | 19 | 16 | 14 | 14 |
| Whiteness % min | 74 | 74 | 74 | 74 | 74 | 74 | 70 | 70 |
| Residual chlorethylenecontent mg/kg max | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 |
| Ethylidene chloride mg/kg max | 150 | 150 | 150 | 150 | 150 | 150 | 150 | 150 |
Application:
*SG-1 is used in producing high-grade electrical insulating material
*SG-2 is used in producing electrical insulating material, common soft products and film
*SG-3 is used in producing electrical insulating materials, agricultural film, daily-use plastic products,such as Films, raincoat, industry packing, artificial leather, hose and shoe-making material, etc.
*SG-4 is used in producing membranelle for industrial and civil use, tube and pipes
*SG-5 is used in producing transparent products section bar, hard tube and decorative materials,such as Rigid plate, gramophone record, value and welding rod, PVC pipes, PVC windows, doors ,etc
*SG-6 is used in producing clear foil, hard board and welding rod
*SG-7, SG-8 is used in producing clear foil, hard injection molding.Good hardness and high strength,mainly used for tubes and pipes
If any request for PVC Resin, feel free to contact Ms. Grace.