Products

ASTM D6 ASTM D1754 Bitumen Oven for Thin Film Oven Test by Tfot Method

China ASTM D6 ASTM D1754 Bitumen Oven for Thin Film Oven Test by Tfot Method, Find details about China Rtfo Test for Bitumen, Rtfot from ASTM D6 ASTM D1754 Bitumen Oven for Thin Film Oven Test by Tfot Method

Model NO.
GD-0609
Loading Method
Dynamic Load
Display
Digital
Weight
0-100Kg
Power Source
AC220V
Oil Cylinder Position
Under
Thin Film Oven
Bitumen Oven for Thin Film Oven Test.
Tfot
Evaluation of Aging Characteristics of Asphalts
Temperature of Working Chamber
163+/-0.5c
Temperature Controlling Accuracy
+/-0.5c
Rotation Speed of Turntable
5.5 R/Min+/-1 R/Min
Sample Quantity
4
Size of Workroom
450mm*450mm*510mm
Ambient Temperature
5~50c
Warranty
1 Year
Trademark
GOLD
Transport Package
Plywood
Origin
Made in China
HS Code
9031809090
Model NO.
GD-0609
Loading Method
Dynamic Load
Display
Digital
Weight
0-100Kg
Power Source
AC220V
Oil Cylinder Position
Under
Thin Film Oven
Bitumen Oven for Thin Film Oven Test.
Tfot
Evaluation of Aging Characteristics of Asphalts
Temperature of Working Chamber
163+/-0.5c
Temperature Controlling Accuracy
+/-0.5c
Rotation Speed of Turntable
5.5 R/Min+/-1 R/Min
Sample Quantity
4
Size of Workroom
450mm*450mm*510mm
Ambient Temperature
5~50c
Warranty
1 Year
Trademark
GOLD
Transport Package
Plywood
Origin
Made in China
HS Code
9031809090
GD-0609 ASTM D6 ASTM D1754 Bitumen Oven for Thin Film Oven Test by TFOT Method


Introduction:

This Thin Film Oven is used to determine the effect of heat and air on a film of semisolid asphaltic materials. The effects of this treatment are determined from measurements of selected asphalt properties before and after the test.

The TFOT is applied to determine the loss in mass, of oil and asphaltic / bituminous compounds when heated with the loss on heating test method or the effect of heat and air on semisolid asphaltic / bituminous materials with the thin film oven test (TFOT) method.


Features:

1. The outer shell is made of sheet steel. It equips a stainless steel working chamber on the top half. There is a observation window in the center. An illuminating lamp is equipped inside the chamber. Easy to observe the reading of thermometer inside the chamber during the test.
2. Heating device is equipped on the bottom of chamber. It adopts natural convection method to heat the air. The chamber can be heated uniformly by air channel on the top, bottom and back.
3. There are four turn plates for placing the specimen container on in the center of chamber. It can be rotated by a motor having a rate at 5.5RPM.
4. Intelligent temperature controller ensures the temperature being at 163ºC±0.5ºC as per standard test method.


Specifications:

1. Power supply: AC220V±10%,50Hz
2. Power: 2.5KW
3. Temperature of workroom: 163ºC±0.5ºC
4. Temperature control accuracy: ±0.5ºC
5. Rotate speed of turn plate: (5.5r±1r)/min
6. Test sample quantity: 4 pieces
7. Size of workroom: 450mm*450mm*510mm
8. Ambient temperature: 5ºC~50ºC
9. Relative humidity: ≤85%


ASTM D6 ASTM D1754 Bitumen Oven for Thin Film Oven Test by TFOT Method:

ASTM D6 ASTM D1754 Bitumen Oven for Thin Film Oven Test by Tfot Method




 
 


 
 

 

You Might Also Like