Light Grey 1 Pair Drop Wire STB Module Without Protection Network Distribution Box

China Light Grey 1 Pair Drop Wire STB Module Without Protection Network Distribution Box, Find details about China Network Distribution Box, Terminal Block Box from Light Grey 1 Pair Drop Wire STB Module Without Protection Network Distribution Box

Model NO.
STB module
Material
Cold Steel,Finished by Painting
Subscriber Terminal Block Module
0.4 - 1.0mm (26-18 Gauge)
Flame Retardant Performance
UL94-V0
Relative Humidity
Less Than 85%(+30°c)
Trademark
SURELINK
Specification
1pair
Origin
China
Model NO.
STB module
Material
Cold Steel,Finished by Painting
Subscriber Terminal Block Module
0.4 - 1.0mm (26-18 Gauge)
Flame Retardant Performance
UL94-V0
Relative Humidity
Less Than 85%(+30°c)
Trademark
SURELINK
Specification
1pair
Origin
China
Surelink light grey 1 Pair Drop Wire STB Module without
Protection Network Distribution Box


Light Grey 1 Pair Drop Wire STB Module Without Protection Network Distribution Box
Light Grey 1 Pair Drop Wire STB Module Without Protection Network Distribution Box
Light Grey 1 Pair Drop Wire STB Module Without Protection Network Distribution Box
Technical Parameters

The Subscriber Terminal Block module provide a connection point between an exchange-side cable pair and
a distribution pair. It incorporates a 5-point plug in module to provide continuity and a range of other options.
Removal of the plug-in module does not disturb wire connections but makes contacts to them available for
testing of both sides of the network. The copper pairs are terminated by screw-operated IDC contacts,
designed for wire diameters in the range 0,6 ÷1,25 mm.

N.W.: 16 KGS
G.W.: 17 KGS
MEAS: 44 * 27 * 24 CM

Features
1 Insulation displacement (IDC) Type Connections
2 No wire stripping required.
3 No special tools required for installation.
4 Will accept 0.4 - 1.0mm (26-18 gauge) conductors.
5 Totally encapsulated wire connection points provide complete protection from all environmental conditions.
6Visually inspect the integrity of all wire connections.
7 Reusable - wires may be removed and reinserted without affecting IDC contacts or integrity of seal.
8 Will permit up to 100 wire terminations on both line and subscriber side connections.
9 Rugged Design and Construction.

Applications
 Designed for mounting on standard DIN rails.
 DIN rail doubles as an earth point.

Contact characteristics
Drop wire connector 
Gauge range 0.4 to 1.05 mm Ø
Insulation diameter 5 mm max. Ø
Pair connector 
Gauge range 0.4 to 1.05 mm Ø
Insulation diameter 3 mm max. Ø
Current conducting capacity
     20 A, 10 A per conductor for 10 minutes at least without causing deformation of the module(If > 20 A up to 30 A is required,this is possible using a different GDT)   

 

Insulation resistance
Dry atmosphere> 10¹²ohm
Damp atmosphere (ASTM D618)> 10¹²ohm
Salt fog (ASTM B117)> 10¹²ohm
Immersion in water (15 days in 3 % NaCl solution)> 10¹ºohm
Contact resistance
Rmaterial + Rbridge contacts
Rwire contacts 
< 10mohm
Increase in contact resistance
After climatic tests< 2.5 mohm
After 50 reinsertions< 2.5 mohm
Dielectric strength> 3.000 Vdc for 1 minute
Pair/drop wire housing screwSpecial passivated direct +lacquered Zamac alloy
Housing bodyABS Flame retardant
Stb moduleFlame retardant (UL 94) glass-fiber reinforced 
polycarbonate
Insertion contactsTinned phosphor bronze
Ground contactsCu - Zn - Ni - Ag alloy
Continuity contactsTinned hard brass
Lower sealantPolymeric resin
Upper cable sealantSilicone fluid
Pair/drop wire bearing coverPolycarbonate
Plug-in module bodyFlame retardant (UL 94) glass-fiber reinforced 
polycarbonate
Plug-in module sealantGel
"O"-ringEPDM
SpringStainless steel
Cable/drop wire membraneThermoplastic rubber
 
Related Hot Models

Light Grey 1 Pair Drop Wire STB Module Without Protection Network Distribution Box

Manufacturer Introduction
 
Zhuhai Surelink Communication Cable Co.,Ltd is one of the leading manufacturer in the cables
and telecom accessories.  We have more than 20 years experience in this line.Our factory has over 
twenty production lines and 300 employees.

 
Our productions comply with ISO9001.Professional team,powerful factory and strict quality control give 
best service to our clients and the quality guarantee in every order.

 
Our products have been widely installed in Telecom companies and many distributors around the world. 
We export to more than 70 countries and our annual revenue is more than hundreds of million USD.

 
We have established a close relationship with many companies around the world and we sincerely look
forward to woking with all clients from all over the world.

 
OEM and ODM order highly welcome !
 
Main Cable Categories Provided by Us
 
1.Optical Fiber Cable and Patch Cord
2.Lan and Network Cable and Patch Cord
3.Alarm Cable and Speaker Cable
4.Drop Wire and Telephone Cable
5.Communication Cable
6.Coaxial Cable
7.Electrical Wire and Power Cable
8.Telecom Accessory.

 
Workshop and Company Show
 Light Grey 1 Pair Drop Wire STB Module Without Protection Network Distribution Box
 
Package and Delivery
 
Light Grey 1 Pair Drop Wire STB Module Without Protection Network Distribution Box
 
Payment and Shipping
  
Payment
We usually use T/T
T/T deposit before production and balance when shipment.
Payment terms: Western Union, Escrow, Paypal, T/T ,L/C

Shipping
If the quantity of the order is not very big, we usually send by express delivery,such as TNT,DHL,UPS,
FEDEX or EMS.

For big order,we will ship the goods by air or by sea.

 
Just Talk To Us!
 
Light Grey 1 Pair Drop Wire STB Module Without Protection Network Distribution Box