Plastic Grid Driveway System/Stabilization Geocell

China Plastic Grid Driveway System/Stabilization Geocell, Find details about China HDPE Geocell, Geocell Price from Plastic Grid Driveway System/Stabilization Geocell

Model NO.
5cm/8cm/10cm/15cm/20cm
Surface
Coarse Surface
Height
5\8\10\15\20cm
Expanding Size
4.5*5m2, 6.5*4.5m2, 13.2*4.5m2
Thickness
1.1mm-1.6mm
Certificate
Ce ISO9001/BV
Trademark
OEM
Transport Package
Sea Transportation
Specification
5\8\10\15\20cm
Origin
Shandong, China
HS Code
7015109000
Model NO.
5cm/8cm/10cm/15cm/20cm
Surface
Coarse Surface
Height
5\8\10\15\20cm
Expanding Size
4.5*5m2, 6.5*4.5m2, 13.2*4.5m2
Thickness
1.1mm-1.6mm
Certificate
Ce ISO9001/BV
Trademark
OEM
Transport Package
Sea Transportation
Specification
5\8\10\15\20cm
Origin
Shandong, China
HS Code
7015109000
Products Description
 
 
Geocell height50mm,80mm,100mm,150mm,200mm
Welding spacing300mm-1000mm
Expanding size4.5×5m2, 6.5×4.5m2, 13.2×4.5m2
 

Geocell is honeycomb shaped structures, in material of HDPE, welded by highfrequency ultrasonic. Being flexible, geocell can be folded in transit and outspreaded filling with sand, stone or concrete in roadbed construction.

 
Plastic Grid Driveway System/Stabilization GeocellNo Gravel Base Required!

The Geocell does not require a gravel base. This is due to both the depth and amount of compaction which takes place within the confined cells. Simply lay an approved geotextile below the grid and fill. The result is a savings in both labor and material cost.
 
Which Depth Cell do I need?

For load support, the 3" Geocell with a gravel infill is rated for approximately 8,000 pounds and is best suited for light passenger vehicles, golf carts, horse paddocks etc. The 4" is rated at 40,000 lbs and is best suited for most driveway and parking lot applications. The 6" at 60,000 lbs is designed for emergency access or areas where heavy vehicles will be driving over regularly. The 8" is suited for specialty applications where heavy machinery will frequent.
 
Plastic Grid Driveway System/Stabilization Geocell
Plastic Grid Driveway System/Stabilization GeocellFabric for Beneath the Geocell (Required) & Accessories

It is required that a layer of geotextile fabric is placed below the Geocell to prevent the gravel from absorbing into the ground while providing adequate strength and drainage. Additionally, J-Hooks, and staples / heavy duty zip ties are recommended to attached multiple panels.
 

BENEFITS:

  • Reduces the amount of base material by up to 50%
  • Reduce the stress inflicted on subgrade when a load is applied
  • Reduces overall installation cost due to the reduction of rock required
 

ENVIRONMENTAL BENEFITS:

  • Reduce Stormwater Runoff
  • Natural Recharging of Groundwater
  • Capture Airborne Pollutants
  • Safely Distributes Car Oil Leakage
  • Reduce Hot Surface Temperatures

Product Features:
 
Plastic Grid Driveway System/Stabilization Geocell

Gravel Fill

Aggregate surface (crushed rock)
Limited access roads
Gravel parking lots
Boat ramps
Fire access lanes
Rv parking areas

Grass Fill

Permeable paving (turf / vegetated)
Overflow parking areas
Green parking spaces
Green roof areas
Vegetated ground cover

Plastic Grid Driveway System/Stabilization Geocell
Plastic Grid Driveway System/Stabilization GeocellPlastic Grid Driveway System/Stabilization Geocell

UNDER ASPHALT & CONCRETE

When used under a asphalt or concrete surface the Geocell can help to provide stability and reduce the amount of aggregate required for stabilization.
 
Plastic Grid Driveway System/Stabilization GeocellPlastic Grid Driveway System/Stabilization Geocell

SLOPE & SWALE STABILIZATION

Geocell can be used to stabilize hillsides and swales in additional to providing load support. The permeable geocells allow for water to flow through the material and help to keep the infill material from eroding.
 
Product Application

Plastic Grid Driveway System/Stabilization Geocell
 
Plastic Grid Driveway System/Stabilization Geocell
  • Erosion Control

  • Load Support

  • Slope Protection

  • Channel Protection

  • Retaining Wall

  • Ground Stabilisation
 
 
 
Product specifications and performance parameters
Lianyi HDPE Geocell
Material    Properties
Polymer Density (ASTM D 1505)g/cm30.935-0.965
Environmental Stress Crack Resistance (ASTM D 1693)hrs6000
Carbon Black Content (ASTM D  1603)%min.   1.5%
Nominal Sheet Thickness before texturing (ASTM D 5199)mmmin.   1.27-5%,+10%
Nominal Sheet Thickness after texturing(ASTM D 5199)mmmin.   1.52-5%,+10%
MaterialHDPE
TextureHDPE strip consists of a multiple rhomboidal indentations, over the entire strip on both sides of  the strip.The indentations have a surface density of 22 to 32 per cm2
PerforationsHDPE strip is perforated with horizontal rows of maximum 10mm diameter holes. Cell perforations area is less than 12% of  cell surface area.
Cell/    Section   Properties       
PropertyUnitDTGS5DTGS8DTGS10DTGS15DTGS20
Weld   Spacingmm300-400330-1000330-400330-400330-400
Cell  Depthmm50, 80, 100, 150, 200
Seam   PropertiesCell   Depth
mm5080100150200

 
Company Information
Plastic Grid Driveway System/Stabilization Geocell
FAQ
 
Q1:What is your delivery time?
A1:Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q2:Where is your company?
A2:Feicheng shandong province, China and if you want to coming,please call me ,I will arrange your schedule.
Q3:Are you trading company or manufacturer?
A3:We are manufacturer.So wo have a lower price than trading company.
Q4:What is your delivery method?
A4:T/T, Western Union, L/C,PAYPAL...
Q5:Do you provid samples?Is it free or extra?
A5:Yes, we can offer the sample for free charge but do not pay the cost of freigh.
Q6:What is your terms of payment?
A6:Payment<=1000USD,100% in advance.Payment>=1000USD, 30%T/T in advance, balance before shippment. If you have another question, please to contact me