* Double coated PET tape is a double-sided self-adhesive tape consisting of a PET backing and a tackified acrylic adhesive. This product has very high bonding strength and excellent resistance to demanding environmental conditions.
*Product Structure
| | Acrylic adhesive layer |
| | PET film layer |
| | Acrylic adhesive layer |
| | Release Liner |
*Features
-High bonding strength;
-Excellent resistance to demanding environmental conditions.
*Application Ideas
-It is mainly used for bonding various plastics, metals and glass.
*Technical Date
| Items | Unit | Spec value | Value | Test Method |
| PET thickness | μm | 12±1 | 12 | ASTM D3652 |
| Total thickness | μm | 50±10 | 53 | ASTM D3652 |
| Peeling (20 min ) | N/25mm | 15 | 17 | ASTM D3330 |
| Peeling (72 hrs ) | N/25mm | 17 | 18 | ASTM D3330 |
| Shearing | Hours | >72 | >72 | ASTM D3654 |
*Delivery:
-30 days after deposit payment
-OEM is available
*Operation guidance
-To ensure the best bonding effect, the plate must be dry, clean and non-pollution;
-1-1.5 kg/cm2 pressure is recommended to make sure the adhesive to achieve the best performance;
-The appropriate operating temperature is 18-35 ºC,the bonding is difficult when the temperature below 10 ºC;
-The adhesive strength will increase gradually to arrive the maximum after 72 hrs.
*Recommended storage conditions
-Temperature has to be kept between 23 ºC and relative humidity has to kept 50%;
-The original package has to be kept to protect the product;
-Don't store in wet, salt water and direct sunlight environment;
-The shelf life is 24 months at 23 ºC and 50% relative humidity.
*Disclaimer:
-All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore YCM can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose.