One Way Needle Bearing Hf0612

China One Way Needle Bearing Hf0612, Find details about China One Way Needle Bearing, Backstop from One Way Needle Bearing Hf0612

Basic Info.

Model NO.

(HF0612

Suitable Drawn Cup Bearings

HK0608

OEM

Export

Worldwide

Delivery

10-15days

Trademark

SUMA or OEM

Transport Package

Single Box or as Your Requirements

Specification

Origin

Changzhou, Jiangsu, China

HS Code

84836000

Model NO.

(HF0612

Suitable Drawn Cup Bearings

HK0608

OEM

Export

Worldwide

Delivery

10-15days

Trademark

SUMA or OEM

Transport Package

Single Box or as Your Requirements

Specification

Origin

Changzhou, Jiangsu, China

HS Code

84836000

Product Desciption

Hold Back Bearing with Steel Springs in Good Quality (HF0612)

Product Description

INTRODUCTION
One way clutch -drawn cup roller clutches /clutch and bearing assemblies, It may take the switch, the prevent returning installment, the overdrive clutch. HF, FC, RC (roller pin coupling): Is composed of the drawn cup and the plastic retainer; The retainer may bring the plastic reed also to be possible on the stainless steel reed guidance roller pin, in the addendum circle incline roller conveyer and the roller pin takes the locking arrangement. HFL, FCB, RCB (coupling and bearing assembly): The supporting bearing installs in the roller pincoupling's both sides and withstands the radial load, those who take the supporting bearing is the roller pin and the plastic retainer module. MATERIAL: The outer covering is generally the ST14 low-carbon steel (special occasion may use stainless steel); Keep the shelf usually strengthening nylon; The needle is a bearing steel to roll, produce according to the needs of customer too. For example: Unidirectional HF2016 is widely applied on the washer bearing!

One Way Needle Bearing Hf0612

Shaft Diameter			Mass Approx				Torgue Ma	1
				Borndary Dimensions
	Clutch Designation							Limiting Speed		Suitable Drawn Cup Bearings
				Fw	D	C		Rotating Shaft Min-1	Rotatng Outer Ring Min-1
				Fw	D	C		Rotating Shaft Min-1	Rotatng Outer Ring Min-1
mm	Plastic Springs	Steel Springs	g	mm			Nm	rpm
HF
3	HF0306KF		0.9	3	6.5	6	0.2	36000	7000	HK0306TN
4	HF0406KF	--	1	4	8	6	0.34	34000	8000	HK0408TN
4	HF0406KFR	--	1	4	8	6	0.1	34000	8000	HK0408TN
6	HF0608KF		2.8	6	10	8	1.5	20000	11000	HK0608
	HF0612KF	HF0612	3	6	10	12	1.76	23000	13000	HK0608
	HF0612KFR	HF0612R	3	6	10	12	1.76	23000	13000	HK0608
		HF061210	3.5	6	12	10	3	20000	13000	HK061208
8	HF0812KF	HF0812	3.5	8	12	12	3.15	17000	12000	HK0808
	HF0812KFR	HF0812R	3.5	8	12	12	4	17000	12000	HK0808
	--	HF061210	3.2	8	12	10	3	16000	12000	HK0808
	--	HF081410	3.6	8	14	10	4.6	15000	11000	HK081410
	--	HF081610	4.1	8	16	10	5.5	15000	11000	HK081610
	--	HF081412	4	8	14	12	5	16000	12000	HK081410
10	HF1012KF	HF1012	4	10	14	12	5.3	14000	11000	HK1010
10	HF1012KFR	HF1012R	4	10	14	12	1.5	14000	11000	HK1010
12	--	HF1216	11	12	18	16	12.2	11000	8000	HK1212
14	--	HF1416	13	14	20	16	17.3	9500	8000	HK1412
16	--	HF1616	14	16	22	16	20.5	8500	7500	HK1612
18	--	HF1816	16	18	24	16	24.1	7500	7500	HK1812
20	--	HF2016	17	20	26	16	28.5	7000	6500	HK2010
25	--	HF2520	30	25	32	20	66	5500	5500	HK2512
30	--	HF3020	36	30	37	20	90	4500	4500	HK3012
35	--	HF3520	40	35	42	20	121	3900	3900	HK3512