Features:

The controller uses spray iron shell, with thyristor voltage regulator drive output. The controller input voltage range, drive output with full-wave / half-wave selection. Precautions: Be sure to cut off the power when connecting! The controller input FG terminal must be properly grounded. Make sure that the FG terminal of the output terminal is connected to the vibration chassis. The controller must not be connected to the 380V AC, otherwise it will cause the machine unrecoverable damage! When adjusting the output waveform control selection (full wave / half wave) switch inside this unit, always turn off the power. The controller should be used in a good ventilation environment, the ambient temperature is -20 ºC to 35 ºC. The controller should be in the water droplets, steam, non-corrosive, flammable gases, liquids, floating dust and metal particles in the environment. The controller can not be installed in the open air environment. This controller is only used to drive electromagnetic vibration feeding equipment, not for other purposes. If the machine fails, the user please do not attempt to repair the machine, please call the company contact repair matters, the company's product warranty for one year.

Factory Overview