China Clamp on (D-K3NT) DC Current Sensor Hall Effect Current Transducer, Find details about China Current Sensor, Open Loop Hall Current Sensor from Clamp on (D-K3NT) DC Current Sensor Hall Effect Current Transducer
D-K3NT series hall effect current Sensor is an open loop device based on the measuring principle of the hall effect, with a galvanic isolation between primary and secondary circuit. It provides accurate electronic measurement of DC currents.
| Electrical data (Ta=25ºC±5ºC) |
| Type | D-K3NT- 30A | D-K3NT- 50A | D-K3NT- 100A | D-K3NT- 150A | D-K3NT- 200A | Unit |
| Rated current(Ipn DC) | 30 | 50 | 100 | 150 | 200 | A |
| Measure range(Ip DC) | 0-45 | 0-75 | 0-150 | 0-225 | 0-300 | A |
| Rated output | @Ip=±Ipn DC 4 | V | ||||
| Supply voltage | +12V,+15V,+24V | V | ||||
| Power Consumption | <25 | mA | ||||
| Offset voltage | @Ip=0 ±20 | mV | ||||
| Magnetic offset | @Ip=±Ipn-0 ±20 | mV | ||||
| Offset drift | @ -40~+85ºC ≤±1 | mV/ºC | ||||
| Output drift | @ -40~+85ºC ≤±1 | mV/ºC | ||||
| Linearity | @Ip=0-±Ipn ≤1 | %FS | ||||
| Response time | @50A/μS, 10%-90% ≤7 | μs | ||||
| Galvanic isolation | @ 50HZ,AC,1min 2.5 | KV | ||||
| Applications |
| Directions for use |
| Standards |
| General date |
| Value | Unit | |
| Operating temperature(TA) | -40 to +85 | ºC |
| Storage temperature(TS) | -40 to +125 | ºC |
| Mass(approx) (M) | 26 | g |