High purity Molybdenum boat for sintering and annealing

Specification:
1) Purity: 99.95%(min)
2) melting point: 2622 degree
3) Density: 10.2g/cm3
4) Grade: Mo1, TZM, Mla
5)Joint: Rivet, fold, weld
6) With or without drilling holes, according to drawing
7) Surface: As rolled, chemical clean or sandblasting, dependant on different thickness of sheet be used

If you have special requirement, we recommend you to choose TZM, and MLa
TZM
We add titanium and zirconium to strengthen the microstructure of pure molybdenum. Mo-Ti solid solution and Ti-Zr carbides ensure that optimum strengths are achieved at temperatures up to 1400° C
MLa
Small quantities of lanthanum oxide particles (0.3 or 0.7 percent) give the molybdenum a so-called stacked fiber structure. This special microstructure is stable at up to 2000° C.

Application: For sintering and annealing

We can produce as your drawing