Products

Tzm Annealing and Sintering Molybdenum Boats

China Tzm Annealing and Sintering Molybdenum Boats, Find details about China Molybdenum Boat, Annealing and Sintering Molybdenum Boat from Tzm Annealing and Sintering Molybdenum Boats

Model NO.
MB-1
Density
10.2g/cm3
Joint Method
Riveted, Folded or Welded
Grade
Mo1, Tzm, Mla
Trademark
Shibo
Transport Package
Wooden Case
Specification
ASTM
Origin
China
HS Code
81029900
Model NO.
MB-1
Density
10.2g/cm3
Joint Method
Riveted, Folded or Welded
Grade
Mo1, Tzm, Mla
Trademark
Shibo
Transport Package
Wooden Case
Specification
ASTM
Origin
China
HS Code
81029900
Annealing and sintering Molybdenum boats

Specification:
1) Purity:99.95%(min)
2) melting point:2622 degree
3) Density:10.2g/cm3
4) Size:60(height)*145(width)*240mm(length)
5)Joint: rivet, fold, weld
6) With or without drilling holes, according to drawing
7) Surface: as rolled, chemical clean or sandblasting, dependant on different thickness of sheet be used

If you have special requirement, we recommend you to choose TZM, and MLa
TZM
We add titanium and zirconium to strengthen the microstructure of pure molybdenum. Mo-Ti solid solution and Ti-Zr carbides ensure that optimum strengths are achieved at temperatures up to 1400° C
MLa
Small quantities of lanthanum oxide particles (0.3 or 0.7 percent) give the molybdenum a so-called stacked fiber structure. This special microstructure is stable at up to 2000° C.

We can produce as your drawing.Tzm Annealing and Sintering Molybdenum Boats


 

You Might Also Like