Hr1500 20-40kg/Hour Electric Grain Mill Grinder Pepper Grinding Flour Powder Coffee Beans Mill

China Hr1500 20-40kg/Hour Electric Grain Mill Grinder Pepper Grinding Flour Powder Coffee Beans Mill, Find details about China Flour Milling Machine, Flour Mill Price from Hr1500 20-40kg/Hour Electric Grain Mill Grinder Pepper Grinding Flour Powder Coffee Beans Mill

Basic Info.

Model NO.

HR-1500

Condition

New

Customized

Marteria

Stainless Steel

Color

Sliever

Service

Onlie

Sample

Welcomed

Usage

Grinding

MOQ

Thickness

50-200

Trademark

HORUS

Transport Package

Outside -Wooden Packing

Specification

60*28*41.5

Origin

Zhejiang

HS Code

8437800000

Model NO.

HR-1500

Condition

New

Customized

Marteria

Stainless Steel

Color

Sliever

Service

Onlie

Sample

Welcomed

Usage

Grinding

MOQ

Thickness

50-200

Trademark

HORUS

Transport Package

Outside -Wooden Packing

Specification

60*28*41.5

Origin

Zhejiang

HS Code

8437800000

Product Desciption

The main purpose:
This grinder is popular in homes, commercial use.

Application
Various grains: sesame, walnut, rice, black rice, soy, mung bean, peanut,lotus seed, corn, broomcorn, barley, buckwheat, oat, etc.
Various dry herbs: almond, poria cocos, red dates, semen euryales, Lycium barbarum, Coix seed, hawthorn, Chinese yam, fleece-flower root,red bean, frankincense, semen cuscutae, Angelica sinensis, Codonopsis pilosula, Astragalus membranaceus, etc.
Suitable for market, store, pharmaceutical processing plant, hospital, clinics, etc.

working principle:
This machine use activities and the tooth plate relative motion between the fixed tooth plate, the material through the tooth plate impact, friction, shear, impact each other and get crushed material.
The machine features:
1) There is little noise, and the machine is stable when it works.
2) With overload protection reminding to ensure your safety
3)The machine can grind all kinds of food and medicines into 20~200 meshes.
4)Simple operation,non dust and fine powder.
5)No screen,and the thickness can be adjusted.
6)Stainless steel ,structure is simple, low energy, easy to clean, is the ideal grinding equipment.
Flour Mill Machine
Instruction Manual

Hr1500 20-40kg/Hour Electric Grain Mill Grinder Pepper Grinding Flour Powder Coffee Beans Mill

Hr1500 20-40kg/Hour Electric Grain Mill Grinder Pepper Grinding Flour Powder Coffee Beans Mill

Instruction Manual
Thanks for your use(using) our product-multi-function flour milling machine!
Please carefully read the instruction manual before use the machine.

A,Technical parameter

Model	Voltage	Power	N.W.	G.W.	Size
1500	110V/60Hz 220V~240V/50Hz380V/50Hz	1500W	41KG	44.5KGS	71.5X34.5X35CM
2200	110V/60Hz 220V~240V/50Hz 380V/50Hz	2200W	43KG	46.5KGS	71.5X34.5X35CM
3000	110V/60Hz 220V~240V/50Hz 380V/50Hz	3000W	51KG	55.5KGS	71.5X38X38CM
3600	110V/60Hz 220V~240V/50Hz 380V/50Hz	3600W	55KG	60KGS	71.5X38X41CM

B,Operation and Adjustment
1. Please open the front cover, fitted the abrasive disc, spring, apical axis,
bearing ect.
2. Pls insert the hopper into the feed inlet. Pls don't put much material into
the hopper.every time when the machine are crushing. Avoid to feed too
fast and motor stuck.
3.Order to prevent static abrasive disc rotation loose, please fix it into the
milling cavity.
4. Please put dry stuff into hopper, don't put wet stuff.into hopper, otherwise the abrasive disc will be stuck. Then the powder can't come out.
5. Abrasive disc work time must be adjusted according to powder finess require.
Adjust it to loosen the adjustment nut, powder finess by adjusting screw to adjust. Please tighten nut after adjusting.
6. Adjust dynamic abrasive disc: remove dynamic abrasive disc firstly,
then loosen the screw of abrasive disc. And taken down spring,
then fixed dynamic abrasive disc, adjustment abrasive disc until two abrasive
superposition.

C,Special Safety Rules
1.Please check screw of abrasive disc and feed hopper if it is ok before using the
machine every time.
2.Please clean and dry inside machine after using every time.
3.Please repair or replace the part when the machine parts damaged or abrasion.
4.Do not put the machine inversion please put it horizontal and cut off power.
5.The machine should be installed horizontal on the work table.
6.Please wait a moment to put the material into the machine after turn on
the power. Don't put much material in the machine to avoid much material and motor stuck.
7.Please remove the material from machine when complete the process and
cut off the power suddenly.
8.All material must be dry. And don't left metal or stone and other stuff in hopper.

Crusher room stick or there are metal stuck in it	There are some metals or stuff in machine, then machine part are damaged.	Cut off power and check hard goods or change part. .
Grinding is not fine	two abrasive disc is not same level abrasive disc is coloboma or breaken	Adjustment two abrasive disc are same level. Change abrasive.
Low efficiency	Abrasive disc is not sharp Feeding difficultly	Change abrasive Adjustment the space between of abrasive The material size is too big please crush them suitable size.
Motor can't work	Feeding too much Voltage too low Abrasive disc get stick	Reduce feeding. Don't use the machine when the power is not normal. Adjustment the space of abrasive disc and clean up abrasive disc. Replace abrasive disc.

Packing List
Mill Flour Machine	1 pc
Hopper	1 pc
Abrasive disc	4 pcs
overload switch	1 pc
Brush	1 pc
Instruction Manual	1 pc

D,Assembly instruction

1,Motor Cover
2.Motor
3.Motor Mounting Flange
4.Motor Bottom
5.Hopper
6 Rubber Cushion

7.Cushion of abrasive disc
8. static abrasive disc
9.Crushing Cavity
10.Adjustment Screw
11.Adjustment Nut
12.Top Axis
13.Bearing
14.Front Cover
15. dynamic abrasive disc
16. Grinding Sleeve
17.Adjustment sheet
18.Spring

E,General breakdown and operation method

Breakdown phenomenon	Breakdown reason	Correct method
Motor can not start up or startup difficultly	Check whether the overload switch is damaged, The wire diameter is too small voltage is below level Capacitor is damage .	replace overload switch replace suitable wire, when voltage is stable to re-start
Motor weakness The temperature is too high	Motor cutting-out motor bearing damage motor work long time	Check motor Replace motor bearing According to standard time work or pause.
Machine body is strong quakely	Other part weight not equilibrium The coupling is bending deformation Bearing damaged dynamic abrasive disc not equilibrium	Check the part and adjustment weight equilibrium Replace coupling Replace bearing Adjustment dynamic abrasive disc equilibrium