China High Speed -40-85 Working Degree PLC Codesys Scada System Slave Terminal Unit Remote Ethernet I/P I/O, Find details about China Remote Ethernet I/P I/O, Ethernet I/P I/O from High Speed -40-85 Working Degree PLC Codesys Scada System Slave Terminal Unit Remote Ethernet I/P I/O
High Speed -40-85 Working Degree PLC Codesys SCADA System Slave Terminal Unit Remote Ethernet I/P I/O
The CN-8034 Ethernet/IP I/O module supports standard Ethernet/IP protocol access. The adapter supports a Max. input of 504 bytes and a Max. output of 504 bytes. It supports 32 pcs of extended IO modules.
Our remote IO model list :
CN-8011 | CN-8011:Modbus-RTU Network adapter,32 slots, the Max. sum of input and output is 8192 bytes |
CN-8012 | CN-8012:Profibus-DP Network adapter,32 slots, input Max. 244 bytes, output Max. 244 bytes, the Max. sum of inputand output is 288 bytes |
CN-8013 | CN-8013: CC-Link, 32 slots, CC-Link Ver.2, RX/RY Capacity (bit) 896, RWR/RWW Capacity (Word) 128 |
CN-8031 | CN-8031:Modbus-TCP Network Adapter, 32 slots, input & output max 8192bytes |
CN-8032 | CN-8032:Profinet Network Adapter, 32 slots, input & output max 1440bytes |
CN-8033 | CN-8033:EtherCAT Network Adapter,32 slots, max. 1024 bytes input,max.1024 bytes output |
CN-8034 | CN-8034:Ethernet/IP Network Adapter, 32 slots, max. 504 bytes input, max. 504 bytes output |
CT-121F | CT-121F:16 channels digital Intput/24VDC/sink type, PNP,supports counting function(Max. counting frequency of 200Hz),the input voltage is 24VDC, the input high level is valid |
CT-222F | CT-222F: 16 channels digital Output, source, PNP, 24Vdc/0.5A,the output voltage is 24VDC, the output high level is valid |
CT-122F | CT-122F: 16 channels digital input, source, NPN, 24VDC, supports counting function(Max. counting frequency of 200Hz),the input voltage is 0V, the input low level is valid |
CT-221F | CT-221F:16 channels digital Output/24VDC/0.5A/sink type, NPN,the output voltage is 0V, the output low level is valid |
CT-124H | CT-124H: 32 channels digital input, sink or source, 34Pin male connector, 24Vdc, counting function supported (counting frequency up to 200Hz) |
CT-222H | CT-222H: 32 channels digital output, source, 24Vdc/0.5A,34Pin male connector |
CT-2228 | CT-2228:8 channels Digital Output ,source,PNP,24Vdc/0.5A, the output voltage is 24VDC, the output high level is valid |
CT-2718 | CT-2718:8 channels Relay Output ,( 9~30Vdc@2A,110Vac@0.55A, 250Vac@0.25A) |
CT-3158 | CT-3158:8 channels Analog Input,0~5Vdc,-5~5Vdc,0~10Vdc,-10~10Vdc,12 bits,Single-end |
CT-3238 | CT-3238:8 channels analog input/ 0& 4-20mA/16-bit,single ended |
CT-3713 | CT-3713:3 channels Analog Input,RTD(PT100) |
CT-3804 | CT-3804:4 channels Analog Input,Thermocouple( J type, K type, E type, T type, Stype, R type, B type, N type, C type) |
CT-3808 | CT-3808:8 channels Analog Input,Thermocouple( J type, K type, E type, T type, Stype, R type, B type, N type, C type) |
CT-4154 | CT-4154:4 channels Voltage Output,0~5Vdc,-5~5Vdc,0~10Vdc,-10~10Vdc,12 bits,Single-end |
CT-4158 | CT-4158:8 channels Voltage Output,0~5Vdc,-5~5Vdc,0~10Vdc,-10~10Vdc,12 bits,Single-end |
CT-4234 | CT-4234:4 channels analog output, 0& 4-20mA/16-bit,single ended |
CT-5102 | CT-5102: 2 channels encoder/5V input/Quadrature decoding, direction pulse, high speed counting, 2channels DI, 2channels DO, 2 channels encoder/5V input/Quadrature decoding, direction pulse, high speed counting, 2channels DI, 2channels DO, 2 way 5V output, 32bit, Max input frequency of 1.5MHz2 way 5V output, 32bit, Max input frequency of 1.5MHz |
CT-5112 | CT-5112: 2 channels encoder/24V input/Quadrature decoding, direction pulse, high speed counting, 2channels DI, 2channels DO, 2 way 24V output, 32bit, Max input frequency of 1.5MHz. |
CT-5142 | CT-5142: 2-channel encoder/differential input/quadrature decoding, direction pulse, high-speed counting, 2-channel DI, 2-channel DO, 32bit, maximum input frequency 10MHz |
CT-5321 | CT-5321:serial port communication sub-module (RS232, RS485,RS422, either serial port is optional, it supports modbus-RTU /ASCII,master or slave mode, transparent transmission mode) |
CT-5710 | CT-5710:Fieldbus Extended Master Module |
CT-5720 | CT-5720:Fieldbus Extended Slave Module |
CT-5800 | CT-5800:Terminal module |
CT-5810 | CT-5810:Cover board |
CT-623F | CT-623F:8 channels / digital input / 24VDC / source or sink type &8 channels / digital output / 24VDC / source type, single output channel max current 500mA |
CT-7221 | CT-7221:Expansion power Supply( System power input 24Vdc,Output 5Vdc/2A,Field power input 24Vdc,Output 24Vdc/8A) |
MTC034 | MTC034: Din Rail, 32 channels male connector,screw terminal connection |
MTE034 | MTE034: Din Rail, 32 channels male connector,spring terminal connection |
DX210-3SFX-2000 | Length 2 meters, flame retardant material, flexible wire, both ends are female connector |
Hardware Specification
The network adapter is also compatible with CODESYS V3.5.
Max. input is 504 byte
Max. output is 504 byte
Max. explicit message connection is 10
Max. implicit message connection is 5
Max. CIP connection is 10
Max. Bus length is 100m
2*RJ45, 10/100Mbps, self-adaption, full duplex
Technical Parameters
Hardware Specification
System Power: Nominal: 24Vdc, Range: 9-36Vdc
Protection: Overcurrent Protection, Reverse Protection: YES
Power Consumption: 110mA@24Vdc
Internal BUS Supply Current: Max.2A@5VDC
Isolation: System Power to Field Power Isolation
Field Power Supply: Power Supply:22~28V(Nominal 24VDC)
Field Power Supply Current: Max. DC 8A
I/O Modules supported: 32 pcs
Wiring: Max.1.5mm²(AWG 16)
Mounting Type: 35mm Size DIN-Rail
Size: 115*51.5*75mm
Weight: 130gEnvironment Specification
Operational Temperature: -40~85ºC
Operational Humidity: 5%~95% RH(No Condensation)
Protection Level: IP20
Ethernet/IP Parameter
Protocol: Ethernet/IP
Max. input length: 504 Bytes per assembly instance
Max. output length: 504 Bytes per assembly instance
Max. no. of explicit message connections: 10
Max. no. of implicit message connections: 5
Max. no. of CIP connections: 10
Network Interface: 2*RJ45
Speed: 10/100Mbps, MDI/MIDX, Full-Duplex
Max.Bus Legenth: 100m
Dimension
Wiring terminal
Installation
DIN-rail
1.How could i get the manual, technical detail and software?
You can click the software & manual page to download the realted product details or contact us to get it.
2.Do you have after sale support?
Yes we provide all the realted technical support including remote support.
And We will provide you any necessary online training and support too.
3. What is the warranty?
All the ODOT products is with the warranty of 3 years.
Only ODOT-S7PPI/PPI V2.0 is with a warranty of 1 year.
4. How is the payment terms?
100% T/T in advance.
5. What is your shipping channel?
We support all the main stream courier company including: Fedex, TNT, DHL, UPS, and Aramex.
6. What is your lead time?
We will arrange the delivery in 1~ 2 day if we have finished products in stock.
If we have no stock and the lead time will be 1~2 weeks.
7. Do you provide any customized services?
Yes, please contact us with your application details.
We accpet deep customized services including OEM, ODM and there will be a MOQ.
8. Do you accept cooperation as distributors?
Yes, partner and distributorship inquiry are warmly welcomed.