China Gas Line Pipe, Find details about China A53 Steel Pipe, API Pipe from Gas Line Pipe
Specification
ERW Steel Pipe
Electric Resistance Welded Steel Pipe
Usage: Used for low pressure liquid delivery, such as water, gas, and oil. Oil drilling and machinery manufacturing, etc.
Process:
ERW : Electric Resistance Welded pipe
HFI: High Frequency Induction weld pipe
EFW: Electric Fusion Welded Pipe
Standard: API 5L, API 5CT, ASTM 53, EN10217, DIN 2458. IS 3589, JIS G3452, BS1387
Certificate: API 5L PSL1/ PSL2, API 5CT
Out Diameter: 21.3mm -660mm
Wall Thickness: 1.5mm-22.2mm
Length: 0.3 - 18m
Steel Grade:
API 5L : GR B, X42,X46, X56, X60,X65,X70
ASTM A53: GR A, GR B, GR C
EN: S275, S275JR, S355JRH, S355J2H
GB: Q195, Q215, Q235, Q345, L175, L210, L245, L320, L360- L555
Surface: Fusion bond Epoxy coating, Coal Tar Epoxy, 3PE, Vanish Coating, Bitumen Coating, Black Oil coating as per customer's requirement
Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test.
Mill Test Certificate: EN 10204/3.1B
Wall Thickness
API 5L Line Pipe
API 5L Line Pipe
STEEL GRADE
API 5L PSL1/PSL2 GR B , X42, X46, X52, X60, X65, X70
STEEL CHEMICAL COMPOSITION
| STEEL GRADE | % by mass, Maximum | ||||
| C | Si | Mn | P | S | |
| GR B | 0.26 | 0.40 | 1.20 | 0.030 | 0.030 |
| X42 | 0.26 | 0.40 | 1.30 | 0.030 | 0.030 |
| X46 | 0.26 | 0.40 | 1.40 | 0.030 | 0.030 |
| X52 | 0.26 | 0.40 | 1.40 | 0.030 | 0.030 |
| X56 | 0.26 | 0.40 | 1.40 | 0.030 | 0.030 |
| X60 | 0.26 | 0.40 | 1.40 | 0.030 | 0.030 |
| X65 | 0.26 | 0.40 | 1.45 | 0.030 | 0.030 |
| X70 | 0.26 | 0.40 | 1.65 | 0.030 | 0.030 |
MECHANICAL PROPERTIES
| STEEL GRADE | Yield strength, min. psi (MPa) | Tensil strength, min. psi (MPa) | Elongation in 2 in., min.% | |||
| GR B | 245 | 415 | ||||
| X42 | 290 | 415 | ||||
| X46 | 320 | 435 | ||||
| X52 | 360 | 460 | ||||
| X56 | 390 | 490 | ||||
| X60 | 415 | 520 | ||||
| X65 | 450 | 535 | ||||
| X70 | 485 | 570 | ||||
TEST REQUIRED
Chemical Analysis, Mechanical Test, Visusal Inspection , Tension Test, Dimension Check
Bend Test , Flattenting Test, Impact Test, DWT Test, NDT Test
Hydrostatic Test, Hardness Test.....
ASTM A53 GR B Data Sheet
ASTM A53 GR B Data Sheet
STEEL CHEMICAL COMPOSITION
The steel shall conform to the following requirements as to chemical composition:
| STEEL GRADE | Composition Max, % | ||||||||
| C | Mn | P | S | Cu | Ni | Cr | Mo | V | |
| GR B | 0.30 | 1.20 | 0.05 | 0.05 | 0.40 | 0.40 | 0.40 | 0.15 | 0.08 |
MECHANICAL PROPERTIES
| STEEL GRADE | Tensile Strength ,min, Psi ( MPA) | Yield Strength , min, psi, ( MPA) | ||||
| GR B | 60 000 (415) | 350 000 (240) | ||||