China Hdr-60 Single Output DIN Rail Power Supply 60W 12V 4.5A, 15V 4A, 24V 2.5A, Find details about China Power Supply, Power Inverter from Hdr-60 Single Output DIN Rail Power Supply 60W 12V 4.5A, 15V 4A, 24V 2.5A
MODEL:HDR-60 Single Output Industrial DIN Rail Power Supply | |||||||
| |||||||
MODEL | HDR-60-5 | HDR-60-12 | HDR-60-15 | HDR-60-24 | |||
OUTPUT | DC Voltage | 5V | 12V | 15V | 24V | ||
Voltage Tolerance | ±2% | ±1% | ±1% | ±1% | |||
Rated Current | 6.5A | 4.5A | 4A | 2.5A | |||
Current Range | 0-6.5A | 0-4.5A | 0-4A | 0-2.5A | |||
Rated Power | 32.5W | 54W | 60W | 60W | |||
Ripple & Noise | 80mVp-p | 120mVp-p | 120mVp-p | 150mVp-p | |||
DC Adjustment Range | -5%,+10% | -8%,+10% | ±10% | ±10% | |||
Setup, Rise Time | 100ms,30ms/230VAC at full load200ms,30ms/115VAC at full load | ||||||
Hold Time | 100ms/230VAC23ms/115VAC at full load | ||||||
INPUT | Voltage Range | 88~264 VAC47~63 Hz;124~370VDC | |||||
AC Current | 1.2A/115 V 0.8A/ 230 V | ||||||
Efficiency | 76% | 82% | 83% | 81% | |||
Inrush Current | Cold start 20A/115V 40A/230V | ||||||
Leakage Current | <1mA/240VAC | ||||||
PROTECTION | Over Load | 105%~160% | |||||
Protection type: Constant current limiting, recovers automatically after fault condition is removed | |||||||
Over Voltage | 115%~135% | ||||||
Protection type: Shut down o/p voltage, re-power on to recover | |||||||
ENVIRONMENT | Working Temp., Humidity | -20ºC~+60ºC;20%~90 %RH | |||||
Storage Temp., Humidity | -40ºC~+85ºC;10%~95 %RH | ||||||
Vibration | 10~500Hz,2G 10min./1cycle, period for 60min, each along X, Y, Z axes | ||||||
SAFETY | Withstand Voltage | I/P-O/P:3KVAC | |||||
Isolation Resistance | I/P-O/P:100M Ohms / 500VDC | ||||||
STANDARD | Safety Standard | Design refer to UL60950-1,TUV EN60950-1,EN50178 | |||||
EMC Standard | Design refer to EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-2,EN61204-3 | ||||||
OTHERS | Weight | 0.3Kg | |||||
Packing | 48pcs/15.4Kg/1.02CUFT | ||||||
NOTE | 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation. 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |