Y19A Hand-hold and Air-leg Rock Drill
Instruction
Y19A rock drill is mainly used in samll quarries, small coal mines and limestone mines for drilling, blasting for constructing roads in mountain areas, also in the capital construction for water conservancy works. It is suitable for drilling works in large mines for boulder blasting and other projects as well.
When it is matched with air- leg model FT100, it can perform both dry and wet drilling under various kinds of rocks, and it is evenmore flexible in drilling operation when matched with the small- size compressor of capacity of 1.5m3, the function will be better than others.
The flanged control valve is adopted, so it has many advantages such as reasonable in structure, quick in starting, light in weight, fast drilling speed, lower air comsumption, smaller vibration, easier operation, lower trouble rate, long-life parts, good economic effect, ect. It is also equipped with a rubber damping handle, so is eary to operate and provide the operators with necessary working protection.
pneumatic products:
1.Safe and easy operate
2.High efficiency and reliability
3.Best product quality control from cutting edge forging process to product completion
4.Durable with minimal maintenance
Applications
The Y19A rock drill machine is a kind of high efficiency air leg rock drill machinery.
It is mainly used for blasting holes and other drilling works in a quarries, railway construction, water conservancy construction and defence project facility.
It has many advantages, such as reasonable design, light weight, high efficiency, fast drilling velocity, low consumption convenient operation, low trouble rate, long life parts, and good economic effect.
Features
1.Original in distributing construction, nimble in starting, and smooth in operation.
2.It has special strong blowing-out construction, blow strongly is specially suitable for drilling medium and deep-sized holes.
3.It may be used with dry or wet flushing, so it is suitable not only for extinguishing dust of drilling under-ground but also in high frigid zone lacking of water.
Model No. | Y19A rock drill |
weight | 19kgs |
air consumption | 37-43L/S |
air pressure | 0.4-0.5Mpa |
Outside dimensions(L× W× H) | 600× 534× 157mm |
Cylinder dia | 65mm |
Piston stroke | 54mm |
Air pipe inner dia | 19mm |
Water pipe inner dia | 13mm |
Shank dimension | 22× 108mm |
Impact energy | ≥ 28J ≥ 40 J |
impact frequency | 28-35Hz |
Idling speed | ≥ 180 r/min ≥ 200 r/min |