Dyneon Fluoroelastomer

Dyneon FC 2178
Dyneon FC 2179
Dyneon FC 2180
Dyneon FC 2181
Dyneon FC 2182
Packing:25kg/box

Description:
Dyneon Fluoroelastomer FC 2178 is a high-viscosity copolymer of vinylidene fluoride and hexafluoropropylene with a 65.9% fluorine content. This fluoroelastomer (FKM) is curable with amine or bisphenol-type curing agents, and does not include an incorporated curative.
Dyneon Fluoroelastomer FC 2178 is a raw gum used for increasing viscosity and green strength. This FKM can be used in compression molding, and is amine or bisphenol curable.
Dyneon fluoroelastomer FC 2178 can be compounded using standard water-cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical FKM formulations. The dry ingredients should be blended before adding to the masticated gum. For best results, Dyneon fluoroelastomer FC 2178 should be banded on the mill prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability.

Dyneon Fluoroelastomer FC 2179 is a copolymer of vinylidene fluoride and hexafluoropropylene. This high viscosity 66% fluorine fluoroelastomer (FKM) has an incorporated cure technology that may help save time and improve throughput. Additionally, Dyneon fluoroelastomer FC 2179 offers broad chemical and temperature resistance for durability and product longevity.
Dyneon FC 2179 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations.
Dyneon fluoroelastomer FC 2179 has a number of notable features, beginning with broad chemical and temperature resistance: -18°C (-0.4°F) to 250°C (482°F). In addition, the proprietary incorporated cure technology may help save time and improve throughput. FC 2179 also has excellent compression set resistance, low permeation, 66% fluorine, and high viscosity.

Dyneon Fluoroelastomer FC 2180 is a medium-viscosity copolymer of vinylidene fluoride and hexafluoropropylene with a fluorine content of 65.9%. This fluoroelastomer (FKM) is used in compression molding, transfer molding and calendering.
Dyneon fluoroelastomer FC 2180 can be compounded using standard water-cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The dry ingredients should be blended before adding to the masticated gum. For best results, FC 2180 should be banded on the mill prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability.

Dyneon FC 2181 is a copolymer of vinylidene fluoride and hexafluoropropylene with a 65.9% fluorine content. This fluoroelastomer (FKM) offers excellent demolding of complex geometric profiles, and its incorporated cure technology may help you save time and increase throughput.
Dyneon FC 2181 offers excellent demolding of complex geometric profiles, and has many favorable attributes that make it suitable for compression molding, transfer molding and calendering. With its proprietary incorporated cure, you may save time while processing and increase throughput.
Dyneon fluoroelastomer FC 2181 can be compounded using standard water-cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer (FKM) formulations. The dry ingredients should be blended before adding to the masticated gum. For best results, FC 2181 should be banded on the mill prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability.

Dyneon Fluoroelastomer FC 2182 is an intermediate viscosity copolymer of vinylidene fluoride and hexafluoropropylene containing 66% fluorine. Dyneon fluoroelastomer FC 2182 offers broad chemical and temperature resistance for product durability and longevity. Incorporated cure technology may help save time and increase throughput.
Dyneon FC 2182 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. For best results, Dyneon Fluoroelastomer FC 2182 should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability.
Dyneon Fluoroelastomer FC 2182 has a number of favorable attributes that make it suitable for use in injection and transfer molding, as well as extrusion applications. This product offers broad chemical and temperature resistance, as well a proprietary incorporated cure that may help save time and increase throughput.

We can give discount according to order quantity.

We also have good experience in transportation both by air and ocean to overseas.