Marine Manual Tube Bending Machine

China Marine Manual Tube Bending Machine, Find details about China Tube Bending Machine, Tube Bender from Marine Manual Tube Bending Machine

Model NO.
IMPA 613711/712
Trademark
Longyear Marine
Origin
China
Model NO.
IMPA 613711/712
Trademark
Longyear Marine
Origin
China
he hydraulic part uses fast and slow hand pumps and is equipped with an overload unloading mechanism and an oil filter. Therefore, the machine has the characteristics of reasonable structure, light weight, small size, and long service life. It is used in construction, chemical, plumbing, petroleum, coal and other sectors. The ideal manual bending tool.

 

How to use manual hydraulic pipe bender:
l. Tighten the switch of the manual hydraulic pipe bender, and apply lubricating grease to the contact part of the supporting wheel and the mold with the workpiece.
2. According to the size of the pipe to be bent, select the corresponding bending die and install it on the top of the piston rod, and place the corresponding size slots of the two supporting wheels facing the bending die. Pay special attention to the corresponding size of the supporting wheel should be placed on the edge of the wing plate. Inside the hole, "size *** outer hole. And so on. To avoid asymmetrical position of the two supporting wheels, causing damage to the mold and machine parts.
3. After placing the workpiece, cover the upper wing plate, first use the fast pump to press the bending die to the workpiece, and then use the slow pump to press the workpiece to the required angle. After bending, turn on the switch, and the working piston will automatically reset and open. On the wing plate, take out the workpiece.

Precautions for manual hydraulic pipe bender:

1. Before using the manual hydraulic pipe bender, first check whether the oil in the oil tank is sufficient, and if it is insufficient, fill it up.
2. The switch before work-must be shut down; otherwise, the pressure cannot be reached, and the refueling screw plug is loosened to allow the fuel tank to ventilate.
3. The outer diameter of the pipe to be bent must fit the groove of the bending mold, otherwise the workpiece will be concave and the mold will be cracked.
4. The welding seam of the welded pipe should be on the outside or inside of the bend. During the bending process, the two supporting wheels should rotate at the same time and the workpiece should slide in the groove of the supporting wheel. If one side does not move, stop the operation.
5. The manual hydraulic pipe bender should do the cleaning and maintenance work of the equipment at ordinary times. The oil must be cleaned. It must be filtered by a filter screen above 80 mesh, and the oil filter device must be cleaned regularly
6. The manual hydraulic pipe bender uses No. 15 mechanical oil.
Marine Manual Tube Bending MachineMarine Manual Tube Bending MachineMarine Manual Tube Bending MachineMarine Manual Tube Bending MachineMarine Manual Tube Bending Machine

Q: What are the available shipping methods?

A: Port location: Ningbo or Shanghai, China Shipping to: Worldwide Shipping method: by sea, by air, by express Estimated delivery dates depend on specific order list, shipping service selected and receipt of cleared payment. Delivery time may vary.

 

Q: What payment methods are supported?

A: Payment: By T/T, Western Union, Money Gram for samples 100% with the order, for production,30% paid for deposit by before production arrangement, the balance to be paid before shipment. Negotiation is accepted.

 

Q: How to control the quality of Ruihua Products?

A: Products Material: Strictly control the material used, make sure they can meet international requested standards, and maintain long working life.
Semi-finished products inspection: We examine the proudcts100% before finished. Such as Visual Inspection, Thread testing, Leak Testing, and so on.
Production line test: Our engineers will inspect machines and lines at fixed period.
Finished Product Inspection: We do the test according to ISO19879-2005, leakage test, proof test, re-use of components, burst test, cyclic endurance test, vibration test, etc.
QCTeam:A QC team with more than 10 professional and technical personnel. To ensure 100% products checking.

 

Q: How long is the product date of delivery probably?

A: The different product, as well as the diferent run quantity can affect the date of delivery, but in ordinary circumstances product date of delivery about 30 days. Most of products have stock, contact us anytime to get more information.

 

Q: How to Custom-made(OEM/ODM)?

A: If you have a new product drawing or a sample, please send to us, and we can custom-made the product as your required. We wllalso provide our professional advices of the products to make the design to be more realized & maximize the performance.

 

Q: How about the mini order quantity?

A: We don't have strict requirments on most items, due to we have stock. More information can send us the enquiry list, we check and reply you. For custom-made, MoQ will be adviced due to the specific product.