Products

Nitric Oxide NO Gas Detector Sensor Air Quality Monitoring Toxic Gas Petrochemical Electrochemical Petrochemicalcompact

China Nitric Oxide NO Gas Detector Sensor Air Quality Monitoring Toxic Gas Petrochemical Electrochemical Petrochemicalcompact, Find details about China Membrapor, No Sensor from Nitric Oxide NO Gas Detector Sensor Air Quality Monitoring Toxic Gas Petrochemical Electrochemical Petrochemicalcompact

Model NO.
NO/C(F)-range
Sensitivity
High
Certification
RoHS
Customized
Customized
Output
TTL/4-20mA/RS485
Transmitter Board
Integrated/Seperated
Wire
Two or Three Wire
Detecting Range
Selectable
After Sale Service
Yes
Trademark
FAD
Transport Package
Transparent Plastic Box
Specification
32mm
Origin
China
HS Code
8542330000
Model NO.
NO/C(F)-range
Sensitivity
High
Certification
RoHS
Customized
Customized
Output
TTL/4-20mA/RS485
Transmitter Board
Integrated/Seperated
Wire
Two or Three Wire
Detecting Range
Selectable
After Sale Service
Yes
Trademark
FAD
Transport Package
Transparent Plastic Box
Specification
32mm
Origin
China
HS Code
8542330000
Gas Module Introduction
FAD gas module with two/three wire TTL/0-20mA/RS485 output, integrates toxic gas sensor + transmitter board. Adopting imported advanced electrochemical gas sensors, it has features of high accuracy, long lifetime, high stability and high anti-interference. The module is designed to prevent circuit reversed connection, high voltage, high current and lightning.
 
Gas Module Feature
- Long lifetime imported advanced electrochemical sensors
- High accuracy op ams, power supply IC, stable and sensitive
- Detect low or high concentration toxic gases precisely
- High anti-interference ability
- Over range protection, reversed polarity protection and lightning protection
- Low power consumption with a standard 4-20mA two/three-wire signal output
- Interface: pump, diffusing, flange, flange thread types
- 12-36VDC operating voltage

 
Nitric Oxide NO Gas Detector Sensor Air Quality Monitoring Toxic Gas Petrochemical Electrochemical PetrochemicalcompactNitric Oxide NO Gas Detector Sensor Air Quality Monitoring Toxic Gas Petrochemical Electrochemical Petrochemicalcompact
Sensor Detecting Range Selection
Detecting range Output Signal (nA/ppm)Features
NO/C-16000.00 ± 2000.00 highest sensitivity
NO/C-252000.00 ± 400.00 highly sensitive
NO/C-100
NO/CF-100		550.00 ± 110.00
400.00 ± 80.00
with filter
NO/CF-2000100.00 ± 20.00 Emission Monitoring

Sensor Performance Characteristics(take NO/C-1 as an example)
Nominal Range0 - 1 ppm
Maximum Overload5 ppm
Expected Operation Life2 years in air
Output Signal6000 ± 2000 nA/ppm
Resolution0.02 ppm
Temperature Range- 20 °C to 50 °C
Pressure RangeAtmospheric ± 10%
Pressure CoefficientNo data
T90 Response Time< 40 sec
Relative Humidity Range15 % to 90 % R.H. non-condensing *
Typical Baseline Range (pure air, 20°C) +0.1 ppm to +0.5 ppm
Maximum Zero Shift1 ppm
Typical Long Term Output DriftND
Recommended Load Resistor10 Ohm
Bias Voltage+300 mV
Repeatability< 2 % of signal
Output LinearityLinear
* The sensor has no protection against condensation
 
Sensor Physical Characteristics
Weight~ 13 g
Position SensitivityNone
Storage LifeSix months in container
Recommended Storage Temperature5 °C - 20 °C
Warranty Period12 months from date of dispatch

Sensor Cross-sensitivity Data
Interfering Gas
Concentration (ppm)
Reading (ppm)
CO 3000
H2S15<5
NO220<5
H23000
SO250

Performance data conditions: 20 °C, 50% RH, 1013 mbar

Nitric Oxide NO Gas Detector Sensor Air Quality Monitoring Toxic Gas Petrochemical Electrochemical Petrochemicalcompact
Module Parameters
Module typeGM-I2(3)-M/C/S-**-****/G/P/F/FL
Detected gasToxic gas
Detecting principleElectrochemistry
SamplingDiffusing  pump  flange  thread
Responding time30s~40s(of the sensor)
Module accuracy≤±3%FS(actual concentration, higher accuracy depends on specified sensors)
Module repeatability≤±2% FS
Module linear error≤±2% FS
Module zero temperature drift≤±2% (FS/year)
Module operating temperature-40~80°C
Module humidity0-95%RH(non-condensation)
Sensor operating temperature-20°C~50°C
Sensor humidity0-90%RH(non-condensation)
Signal outputTTL/4-20mA /RS485   (two or three wire)
Transmitting distance1000 meters(RS485)
Operating voltageDC 12-36V
Maximum power≤0.8W
Size80*48mm
Explosion proofIntrinsic safe
Connection cableRVVP3 x 1.5mm²

Module applications
Petroleum, petrochemical, metallurgy, chemical, electricity, telecom, gas, mining, pharmacy, municipal wastewater treatment, indoor environment, atmospheric environmental protection, transit equipment, transportation facilities, tunnel safety and underground parking, leak detection, safety and environmental control

 

You Might Also Like