Ruihui specializes in manufacturing all kinds of stamping production peripheral equipment, feeder, automatic feeder, punch feeder, leveling machine, precision leveling machine, leveling machine, feeder, automatic feeder, servo feeder, high speed roller feeder Three-in-one feeder, air feeder, two-in-one rack and leveling machine, uncoiler, heavy material rack, etc., can be customized according to customer requirements.
1.Easy Access to Work Rolls:
The work rolls on the HL can be opened to a maximum of 20 degrees,making roll cleaning much easier,The machine was designed to allow easy access to the inside structure  for improved maintenance.

2.Coil Material Entry Support Assembly:
Save Main Power Increase Safety, Easily move the material into punch rollers. 
 
Straightening Performance(For Yield Strength materials):

NC servo feeder maintenance tips:
1. In the course of work, it is necessary for the personnel who guard the NC servo feeder to have general technical knowledge and to understand the performance of this product. The NC servo feeder should normally be launched when there is no load, and then parked after the material is unloaded. car.

2. When guarding the NC servo feeder, always check the operation of each component. If any loose parts are found, tighten them in time.

3. The screw tensioning equipment installed at the tail should be adjusted and suitable, and the feeding belt should have the normal working tension. The guards should always check the work of the conveyor belt. The damaged part should be replaced according to the degree of damage (whether it affects the production) and whether the resolution is replaced immediately or when it is to be repaired.

4. During the working process, the non-workers should be away from the machine and should not touch any rotating parts. If defects occur, the work should be stopped and the shortcomings should be eliminated.

5. Try not to be eroded by oil on the servo motor.

6. do not lack oil in the oil cup of the two-point combination.

The punch feeder is more and more widely used in the auto parts industry. It meets the requirements of modern people for instrument precision, and also saves labor costs and reduces artificial injuries. The three-in-one feeder is also widely used in the stamping industry. It can be said that it is an indispensable feeder for the modern press industry. According to the requirements of different punching presses, the three-in-one feeder meets the production needs of different types of punching machines. The yaw feeder in the punching machine is the most common used in automobile manufacturers. Everyone knows the car. Auto parts parts have high precision requirements and complex product parts.

OUR SERVICE:

Why choose Ruihui's products?
1^st,We have a high level of technical research and development team;
2^nd,We can provide the design and planning of the whole plant to realize the turnkey project;
3^rd, our philosophy: quality is the social responsibility;
4^th,our products have been recognized by the market, in the major automotive OEM, home appliance industry, hardware industry has been applied;
5^th,We have a highly effective after-sales service team and get customer approval.