Products

Polymeric Pm400 From Wanhua

China Polymeric Pm400 From Wanhua, Find details about China Pm400, PU Foam from Polymeric Pm400 From Wanhua

Model NO.
PM400
Trademark
shunda
Specification
220kg/Drum
Origin
China
HS Code
2912190090
Model NO.
PM400
Trademark
shunda
Specification
220kg/Drum
Origin
China
HS Code
2912190090
POLYMERIC PM400
Polymeric Pm400 From Wanhua
Application:
WANNATE® PM-200 is a diisocyanate-diphenylmethane(MDI)-based composition containing some higher functionality isocyanates. The functionality is about 2.6-2.7. It is abrown liquid at ambient temperatures.
WANNATE® PM-200 can be widely used in the production of rigid PU foam heat-insulating materials; also used in isocyanurate foam, paints, adhesives, structural foam,cellular integral skin foam, automotive bumper and interior parts, high-resilience foam and synthetic wood, etc. Due to its unique composition structure, WANNATE® PM-200 can provide better flowability. It is, therefore, particularly suitable for the production which require strict flowability of systems.

 Typical physical properties:
Item(s)Specification(s)
AppearanceBrown Liquid
Viscosity at 25 C, mPa. s350~500
-NCO, %Wt30.5~32.0
Specific gravity at 25 C, g/cm31.220~1.250
Acidity (HCI) , %≤ 0.05
Hydrolysable Chlorine, %≤0.2

Storage Recommendation: Since WANNATE® PM-400 is a reactive chemical, reaction with atmospheric moisture happens easily and leads to the formation of insoluble ureas and carbon dioxide gas, which can result in pressure build-up in closed containers and viscosity increase of the product. Containers must therefore be absolutely dry and carefully sealed after congested with nitrogen.
Containers of WANNATE® PM-400 should be kept properly closed and stored indoors at ambient temperature (15~35 °C) in a well-ventilated area. Storage at low temperature (below 0°C) may lead to some crystallization; this material must, therefore, be protected from frost. If crystallization does occur, the material should be heated to 70-80C to melt it out, and should then be thoroughly agitated before use.
Extended storage at temperatures above 50°C is not recommended to prevent from the formation of insoluble solids and viscosity increase.


Polymeric Pm400 From Wanhua
Polymeric Pm400 From Wanhua
Shunda Company founded in year 1996, is a leading manufacturer of rigid PU foam blend polyol System material, our annual sales reached 50,000 MT in the past three years. We have four
Manufacturer plants in Yantai, Linyi, Dalian and Chang chun with totally more than 400 employees by now. For over 20 years development, Yantai Shunda Polyurethane Co., Ltd has grown up into a modern joint-stock enterprise, which has the research, development, production and operation for the series of rigid polyurethane foam production. We are also the largest global distributor of MDI series of Wanhua Chemical. Depending on our own strong R&D capability, professional purchasing team, quality control ability and full MDI series product supply, we could supply all series of PU raw material to the internal and abroad customers and undertake the
engineering of the insulation project.

Yantai Sanjiang Chemical Industry Materials Co., Ltd is established in 2010 by Shunda Group as its
International sale company, its mainly engaged in Blend polyol, Polyetherpolyol, flameretardants, PU catalysts, Polymeric MDI and other raw materials which are widely used for the insulation of wall and roof building, coldstorage, ship, sandwichpanel, refrigerators, freezers, pipelines, garage door and etc.

Polymeric Pm400 From Wanhua
Polymeric Pm400 From Wanhua
Polymeric Pm400 From Wanhua

Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com
Or please contact us for information:
 
 

You Might Also Like