700kgf Electric Linear Actuator Push Rod

China 700kgf Electric Linear Actuator Push Rod, Find details about China Motor Drive Push Rod, Linear Actuator from 700kgf Electric Linear Actuator Push Rod

Basic Info.

Model NO.

DTI/700/1000/H100

Trademark

X-ing

Transport Package

Wooden Case

Specification

200*96*105 (cm)

Origin

China

HS Code

Model NO.

DTI/700/1000/H100

Trademark

X-ing

Transport Package

Wooden Case

Specification

200*96*105 (cm)

Origin

China

HS Code

Product Desciption

Technical parameters:

model	thrust	speed	push distance	motor model
700	700	H100	30	Y90S-4

Introduction:
The electric actuator is a reciprocating actuator driven by a motor. It is suitable for all linear motion which needs
reciprocating and pushing. It can swing and rotate by means of other connecting rods. It has overload
protection (mechanical and electrical overload protection) It is widely used in metallurgy, electric power, coal,
chemical and other industries. It is widely used in metallurgy, electric power, coal, chemical industry and so on,
with the advantages of light weight, strong pulling force, low noise, low energy consumption and convenient
installation and maintenance. , Especially for long-distance, high-altitude and dangerous situations instead of
hydraulic, pneumatic devices, can be operated separately on-site and centralized control.
Because the nut is fixed relative to the push rod, the screw moves the push rod linearly along the guide rail in
the guide sleeve so as to make the push rod reciprocate. As a result, Push and pull action.
DT type electric linear actuator
Our company produced the DT type, HDG series of electric putt (electric cylinder). Push (pull) force from
0.25KN to 50KN; push and pull stroke speed were 25mm / s, 42mm / s, 84mm / s. Is a smooth and accurate
action, reliable performance, and has built-in overload protection of the mechanical rotation device. In a very
wide range of areas can replace or replace the cylinder, the cylinder, especially in high temperature, fire,
explosion-proof, pollution-free environmental conditions, is an indispensable supporting equipment.
The series, the specifications of the push and pull stroke size or speed (0-100mm / s) can be selected by the
user.
To facilitate automatic control or to achieve a special trajectory, according to user requirements, can be
configured DC, frequency, step, speed and other special motor to meet the total control requirements.
Products are widely used in electricity, machinery, metallurgy, transportation, coal, chemicals, food processing
and other departments.

Technical specification:

NO.	Type	Trust (kg)	Route (mm)	Speed (mm/s)	Motor			380(V)			Le(mm)			contour dimension (LWH)mm		weight (kg)
NO.	Type	Trust (kg)	Route (mm)	Speed (mm/s)		Type		Power(w)		Revolution (T/Min)		Electricity(A)		contour dimension (LWH)mm	LeMin	weight (kg)		LeMax
	1		25-20-I		25		200		48		AO₂5024		40		1400		0.23		369	569	580125118	7.5
	2		25-20-II		25		200		96		AO₂5022		60		2800		0.23		369	569	580125118	7.5
	3		100-40-I		100		400		42		AO5624		120		1400		0.47		640	1040	858152206	23
	4		100-40-II		100		400		84		AO5622		180		2800		0.52		640	1040	858152206	23
	5		300-50-I		300		500		42		AO6334		370		1400		1.12		745	1245	998170226	35
	6		300-50-II		300		500		84		AO6332		550		2800		1.38		745	1245	998170226	35
	7		500-50-I		500		500		50		AO7134		750		1400		2.02		778	1278	1098190226.5	52
	8		500-50-II		500		500		100		AO7132		1100		2800		2.6		778	1278	1098190226.5	52
	9		700-60-I		700		600		50		AO7134		750		1400		2.02		803	1343	1193200279	63
	10		700-60-II		700		600		100		AO7132		1100		2800		2.6		803	1343	1193200279	63
	11		1000-60-I		1000		600		50		JO₂-21-4		1100		1400		2.68		883	1483	1260204271	75
	12		1000-60-II		1000		600		100		JO₂-21-2		1500		2860		3.24		883	1483	1260204271	75
	13		1600-80-I		1600		800		50		JO₂-31-4		2200		1400		4.9		1063	1863	1535302330
	14		1600-80-II		1600		800		100		JO₂-31-2		3000		2860		8.06		1063	1863	1535302330