Solar Traker Linear Atuator Stroker 1000mm

China Solar Traker Linear Atuator Stroker 1000mm, Find details about China Linear Actuator, Solar Tracking Linear Actuator from Solar Traker Linear Atuator Stroker 1000mm

Model NO.
HB-DJ817G-DC-24v-1000MM
Trademark
HB
Transport Package
Carton Box/Pollywood Box
Origin
China
HS Code
8501310000
Model NO.
HB-DJ817G-DC-24v-1000MM
Trademark
HB
Transport Package
Carton Box/Pollywood Box
Origin
China
HS Code
8501310000
HB-DJ817G is heavy load design with ball screw high precision performance special for solar tracking use in hash envioements
Solar Traker Linear Atuator Stroker 1000mm

PLS Know it is customized product ,stroke ,install size ,speed ,motor etc.can be change according to cutomer requiement
Solar Traker Linear Atuator Stroker 1000mm
  There are 3 install method as following:
Solar Traker Linear Atuator Stroker 1000mmFeatures:
    Solar tracking system linear actuator dynamic Load 20000N,static load 60000N for centralized solar power plant, IP66 electric actuators with the capacity for massive wind and snow loads,24V DC  motor  Ball Screw type outdoor use  Linear Actuator for Photovoltaic power station

1,Support DC permanent magnet brushed motor.                                
     2,Power supply voltage: 24 v.                                
     3,Speed range: 1-1.6mm/s.                                
     4 ,  Max load:  20000 N.                                
     5,Applicable temperature: - 40 ºC - 65 ºC,
     6, Duty cycle : 50% at normal temperature.                                
     7,Signal feedback: Hall(Optional).                                
    8,External Hall switch, adjustable stroke, reliable control.                                
     9,IP66 protection Grade for outdoor use.                                
    10,Long life high efficiency designed  ball screw.                                
    11,High weather resistance bellows (Optional).   
1-1 Transmission parameters of the codes
CodeVDCNo-load speed
mm/s
No-load Current
A
Load(push/pull)KNSpeed with load
mm/s
Current with load
A
single hall       pulse/m
1 pairs of poles4 pairs of poles
A24V1.61.3201.33.625.2100.8
B24V1.21.3201437.998151.992
2-1 Product Selection Guide
          
VoltageSpeed  StrokeInstall
Dimension
Rated
Load
Front
end
Rear
End
Cable
Lenth
Cable
end
Hall
24VDC         
1.2mm/s        
1.6mm/s        
150mm-1200mm        
L(See 4-1,4-2)     
20000N     
25 rod end knuckle bearing        
customize   
See 4-1,4-2   
1M         
1.5M  
2M  
customize  
Bonding tin bare wire(can customize connectors ) 
No hall sensor
2 hall sensors
 Solar Traker Linear Atuator Stroker 1000mm
Main test items and reference standards
No.Test itemsStandardsNotes
1Simulated load life testHB FACTORY STANDARD20KN load, stroke 1m, duty cycle 30%,  life test
2Temperature cycling testIEC60068-2-14Low temperature: - 40 ºC± 2 ºC, high temperature: 65 ºC± 2 ºC, high and low temperature for 1 hour, 50 cycle times, full load.
3Temperature shock testIEC60068-2-14Low temperature: - 40 ºC± 2 ºC, high temperature: 65 ºC± 2 ºC, 100 cycles.
4Humidity storage testIEC60068-2-3Temperature 65 ºC± 2 ºC, temperature 95 ± 2% RH, 144H
5High temperature operation testIEC60068-2-2High temperature 65 ºC, load test
6Low temperature testIEC60068-2-1(- 40 ºC± 2 ºC) storage time 48 hours; full load operation
7Mechanical vibration testIEC60068-2-6Sine wave, 10Hz ~ 200Hz (logarithmic sweep) scanning cycle 300s, test time 8h
8Salt spray testGB/T242317-2001The appearance salt spray test needs more than 500h (NSS)
9Protection level testGB4208-93The waterproof test box shall be used according to gb4208-930 standard of shell protection grade
10Static load testHB FACTORY STANDARDUse pressure sensor, industrial computer, cylinder test.
11Cable thermal agingGB2951.11-2008The change of tensile strength and elongation is less than 15%
12Low temperature winding of cableGB2951.14-2008 (
8.1)
(- 40 ºC), 4h after immersion in water 1000VAC / 5m, no breakdown
13UV resistantTOV2pfg1169-200760 ± 2W / m2, 300-400nm, 720h ,no crack
 

Why use linear actuator for solar tracking system
1.Cost is lower (not only  for the metal structure ,the linear actuator,and also the install labor cost etc.)
2. easy to maintain, install, and replace,no need to remove any of the panels if need to replace
3. triangular structure is more stronger than slew drive , no need damper as slew drive
    
Solar Traker Linear Atuator Stroker 1000mmSolar Traker Linear Atuator Stroker 1000mm
Solar Traker Linear Atuator Stroker 1000mm
Solar Traker Linear Atuator Stroker 1000mm

Solar Traker Linear Atuator Stroker 1000mmSolar Traker Linear Atuator Stroker 1000mmSolar Traker Linear Atuator Stroker 1000mmSolar Traker Linear Atuator Stroker 1000mm